of EL PASO, TEXAS
=>Customized Devices Application Form (CDAF)
All Customized Device (CD) Types (framed page) - All CD Types (unframed page)
Mind Control, Electronic Attack, Unusual, Strange CD Types (this webpage)
These 2015 Catalog Webpages Now on CDROM or Disk (only $15)
Lone Star Consulting, Inc., 7250 N. Mesa, Suite C, PMB 70, El Paso, TX 79912
VOICE (9-5 MST): [915 - 474 - 0334]
Check, Money Order, Money Transfer Service (MTS), Trade
sitemap - policies
Site - No cookies - No adware - No spyware - No trojans - No viruses -
No worms - No spam - No popups
We Respect Your Privacy - We do NOT Monitor nor Track Your Activities Online, nor Share Your Data
Our New Mind Control and
Electronic Attack Webpages:
(NOTE: Please Click on either Webpage Link Below as this page has grown so popular and too big that we had to divide it into two new pages (links below), so this old page is no longer current or being updated as of 5/4/15)
ELECTROMAGNETIC, MICROWAVE, RF, ELECTRICAL, IMPLANTS MIND CONTROL ELECTRONIC ATTACKS
SOUND, AUDIO, ULTRASONIC, INFRASONIC MIND CONTROL ELECTRONIC ATTACKS
High-Tech Mind Control Attacks, Electronic Attacks, Countermeasures Customized Device Types
Mind Control (Mindcon, MC), Neurological Weapons, Subliminal Mind Control, Body Control (Bodycon), Behavior Modification, Brain Entrainment, Brainwashing, Brainwave Signatures, Remote Neural Monitoring (RNM), Mind Reading (Mindread), Mind Probing, Remote Influencing, Voice-to-Skull Technology (V2K, V2S), ELF Attacks, Electronic Attacks, Electronic Harassment (EH), Directed Energy Weapons Systems, Electronic Implants (EI) and Brain State Control / Brain State Monitoring, Microwave Attacks, Microwave Harassment, Circular Polarized Light Attacks, Binaural Beats, Carrier Current Attacks, Ultrasonic Attacks, Infrasonic Attacks, Fluorescent Lighting Attacks, Brain Stimulations, Implanted Thoughts, Implanted False Memories, Manchurian Candidates, Electronic Gang Stalking, Manifestations, Electronic Countermeasures Products and Services.
Unique, Original, Made-to-Order, Special Needs, Unusual, Strange, Weird Customized Device Types We Can Do For YOU! Backed by 25+ years of Professional Design Experience!
... and tell your friends!
AARON ALEXIS: Evidence of
Mind Control, and Why Mind Control and Electronic Attack Countermeasures are
BASED ON THE OPINIONS OF LONE STAR CONSULTING, INC.: Aaron Alexis was the Sept. 16, 2013, attacker in the Washington Navy Yard mass shootings. Earlier, Aaron Alexis had reported that three men had followed him from the airport, who were projecting thoughts into his mind and keeping him sleep-deprived using a "microwave machine." Also, Aaron Alexis claimed that the Government was attacking him with ELF signals (Extremely Low Frequency signals). Sound familiar? News reports during the shooting spree claimed that there were three shooters, but later said that Aaron Alexis was the only shooter. Earlier, Aaron Alexis visited two VA medical centers for mental therapy. We believe that Aaron Alexis was a VA Manchurian Candidate - a disgruntled loner Veteran targeted, programmed and triggered using EMF mind control technology to do what he did. The three men who followed him were his handlers - programmers and "Queen of Diamonds" "trigger" men - John Doe #1, John Doe #2 and John Doe #3 (supervisor of Doe #1 and #2) - typical set-up. And that the three originally suspected shooters were Aaron Alexis, John Doe #1 and John Doe #2. Why the reported number of shooters changed to one shooter was because while John Doe #1 and #2 were acting suspiciously (staying close enough to Aaron Alexis to control and monitor him), they never fired shots or acted threatenly themselves, so were later discounted. For decades now we have asserted that Manchurian Candidates are being trained in the U.S., and that the VA is complicit going back to the days where the VA used electroconvulsive "therapy" and lobotamies on Veterans. This was not the first horribly violent act in which John Does were implicated - recall Sirhan Sirhan, Timothy McVeigh, other cases. The moral here is that if you are a Targeted Individual (TI) of mind control and electronic attacks - even if not a Veteran - you better take serious steps to ferret out the attacks and to countermeasure them - else you risk possibly becoming the next Aaron Alexis! Mind control and electronic attacks are usually extremely dangerous - even deadly. Our goal is to help TIs. Let us try to help you.
The Government Never Stops Doing Mind Control and Electronic Attacks on TIs
Many people wishfully believe that because our Government is stressed, or on sequester, or shut down with only essential personnel working, it cuts back on its mind control and electronic attack programs. Mind control and electronic attacks come from governments (ours and many others), corporations, criminal and terrorist organizations, and technically-adept individuals for many reasons. Our Government never shuts down, or even scales back, its mind control and electronic attack research and testing. Some say it even steps them up to better monitor and control people during bad times. Of course, when Government is viewed as weakened, all the other perps know they can more freely operate against Americans because law enforcement intended to detect non-Government perps is also weakened. Never forget that where government protection ends, YOU must do the rest to protect yourself.
FACTS & FALLACIES: INFRASONIC SIGNALS (e.g. BRAINWAVE SIGNALS)
BASED ON THE OPINIONS OF LONE STAR CONSULTING, INC.: Many TIs who contact us about Mind Control and Electronic Attack falsely believe that Infrasonic sounds cause mind control, because they read it Online from a scammer, or an armchair pseudo scientist, or an uniformed or misled TI. The fact is that while infrasonics can be used for some forms of electronic attack, it cannot be used for mind control electronic attacks. The very low bandwidth (BW) of infrasound means that it can carry very little mind control data or even control signals. However, infrasound can cause physical forms of electronic attack by causing micro-vibrations of internal organs and tissues, thus disrupting or even damaging them, thus resulting in such manifestations as general pain, nausea, vertigo, disorientation, dizziness, fainting, blood pressure spikes, loss of sleep, and even death (Note: We are not doctors). Nor can raw infrasonic sounds be pinpointed to individual TIs in a crowd. That's because infrasonic sound is omnidirectional so infrasonic sounds can't target individual TIs (Note: This physical property also makes infrasound much more difficult to jam and shield against), the converse being that the locations of infrasonic transmitters are very hard to pinpoint by TIs. However, since ultrasonics are highly directional, ultrasonics can be used to accurately target individual TIs in a crowd as its energy can be focused into a tight beam at a TI's brain or body, and conversely, ultrasonic transmitters can be pinpointed and jammed and shielded against. The false Infrasound-Causes-Mind-Control tale results because in mind control, infrasonic freqs (e.g. brainwave signals) and audio signals are often used to modulate ultrasonic carrier signals. When these modulated ultrasonic signals enter into the brain or body, they are decoupled from their ultrasonic carriers to then do their dirty little V2K-type manifestations. But when such modulated ultrasonic signals come into contact with and mix with ambient audio outside the body (e.g. environmental sounds such as voices, vehicles, animals, motors, construction) or contact delayed versions of themselves due to reflections (from nearby hard surfaces, sometimes resulting in tell-tale faint voices and other sounds coming from hard surfaces), sum and difference freqs may result (as well as from the decoupling of some of the modulating brainwave and audio sounds from the modulated ultrasonic signals due to such things as obstacles, dust, snow, rain, foilage, clothes or even distance). This process is very complex and little-understood. The difference freqs and decoupled freqs can easily be infrasonic and/or audio signals, thus misleading observers who do not understand mind control and electronic attack technologies to falsely believe that infrasonics cause mind control. By pinpointing ultrasonic transmitters and shielding and/or jamming out their ultrasonic carriers - which we can do for you - you can also eliminate their infrasound and audio sound modulating components, thereby stopping mind control attacks. Let us try to help you.
Our Mind Control and Electronic
Attack Countermeasure Devices Now Come With Advanced Transient Suppression!
Many people these days, especially Online, claim to sell mind control and electronic attack countermeasures and detection devices. Clearly none of whom can match the relevant highly-specialized knowledge, experience, equipment, parts, specialized materials, tools and facilities of Lone Star Consulting, Inc. to actually be able to help mind control and electronic attack victims, and most of whom are clearly outright frauds. Further, we are the only ones we know of who now provide Advanced Transient Suppression Technology (ATST) in our mind control and electronic attack countermeasure devices. All electronic devices can be damaged or destroyed by common high-voltage transients from lightning and defective high-voltage equipment and power lines, electrical arcs and coronas, inductive kicks from high-voltage power interruptions, and static electric discharges. Also, based on what we know, mind control and electronic attack predators are increasingly resorting to directional high-pulse burst transmitters (pulse-type directed energy transmitters), possibly even EMP, to wipeout costly countermeasure devices deployed by mind control and electronic attack victims to protect themselves. Our unique countermeasure devices now come with our ATST protection against up to 1,500 watts of burst energy attack power (at no extra cost) to foil even the most highly dedicated wipeout attack tactics, as well as to help protect you from common forms of high-voltage transients.
We Are Becoming Super Busy
- Please Send Us Your CDAF Today!
Due to an apparent serious upsurge of mind control and electronic attacks and more people learning about us, we are becoming loaded up with new projects. Please do not delay with your project(s). Upon deciding what you want us to do for you, please click on green CDAF link at top of page and send us your CDAF(s). Note: Mostly due to ever-increasing parts costs and decreasing availabilities, we expect to raise our prices on some of our device-types in the coming weeks and months. Also, we may have to discontinue some device-types - later availabilities not guaranteed. Please send us your CD Project CDAF (green link at top of our webpages) today.
We Are Now on Social Media
- Please Join With Us!
FACEBOOK and LINKEDIN
JOIN US ON FACEBOOK AS OUR SOCIAL MEDIA FRIEND AND/OR ON LINKEDIN AS OUR SOCIAL MEDIA CONNECTION! As you likely know, we recently joined FACEBOOK and LINKEDIN social media. To join us, you must first email us directly to LONE STAR CONSULTING, INC., and explain to us why you want to be social media-connected to us. NOTE: We never accept such requests when they solely come through our social media sites - we regularly receive 100s of such requests mostly from totally unknown people. We are very selective - your acceptance is much increased if you are a prior or current Client, or a relevant serious researcher, expert, scientist or engineer. We are constantly engaged in much exciting work that we would like to share with our social media friends and connections. Most of our discussions on Facebook and LinkedIn will relate to mind control, electronic attack, radionics, physical survival and energy through increasingly worsening times. One big benefit is that LONE STAR CONSULTING, INC. will provide free information found nowhere else (e.g. research results), which may be very helpful to you. Another big benefit is that you will be able to share your experiences and needs with others who may be or were in similar situations (e.g. you are experiencing certain types of mind control attacks, which may also be afflicting others in your area). We do not accept just anyone as our social media friend or connection - we seek a smaller but more focused and intense group. Interested in us friending you? Then email us here, and in your Subject Line, put: "Please Friend Me". In your email body, please explain in 100-500 words the benefits to both of us in becoming social media friends (Facebook) or social media connections (LinkedIn). Then tell your friends and connections about us! NOTE: With few exceptions, we are not going to post up our friends on Facebook and connections on LinkedIn until we have selected at least 500 Facebook friends or LinkedIn connections. We are not yet on Twitter or MySpace. - Thanks. John J. Williams, M.S.E.E.
Hello! We support many technologies. For introduction into how to obtain hardware and our design philosophy, please go to our Home Page: Home. Hotlinks to all of our Device Types: Devices. Hotlinks to all of our high-tech Topics, Titles: Site Map. When you are done, please use your Browser's Back Button to return here.
Can you spot electronic implants, and the wire?
This is the actual CT-Scan of the chin, neck and upper back area of one Gary D. Simmons of Australia, a former Navy diver who had been assigned to several clandestine operations, reprinted with permission from Simmons and Consumertronics.net. According to Mr. Simmons, one 'object' is in the spine at the jaw level; the hole in the back of the neck shows a 'wire' running down towards a second 'object' located between the trachea and the spine; there is yet a third 'object' below the jaw. I see other strange 'objects.' Do you? Furthermore, he states these were the results of a surgical operation and an official program in which he and about 100 other elite Navy divers were subjected to as part of, 'medical and mind drug experiments,' which he claims caused many premature deaths among them!
For more info on this image and amazing story => www.harold-holt.net (click on Page 2 hotlink on its bottom), then return HERE!.
DO NOT LET THIS KIND OF TRAVESTY HAPPEN TO YOU!
Recently, Lone Star Consulting, Inc. has received frantic calls involving great fears and concerns about an apparent recent alarming, shocking and frightening upsurge in mind control (mindcon), body control (bodycon) and other electronic attack and electronic harassment incidents (often also referred to as "directed energy weapons attacks" or "psionic attacks"). Clearly, these forms of electronic harassment attacks greatly increased since 9/11, and especially recently due to economic chaos. With chaos, electronic attacks are more likely ignored by the authorities, and victims become more hassled with other issues and more cautious about spending money even to protect themselves. Clearly, some electronic attackers are now electronically attacking their victims with impunity - more open electronic harassment attacks, accelerated electronic attacks, and more severe electronic attacks than ever before! Are you such a victim? It is more important than ever before for YOU to address these issues NOW! Lone Star Consulting, Inc. provides as a free public service by providing the free mind control / electronic attack tutorial, link below (as well as many very exciting and unique related device types described below) for those interested in electronic mind control (including RFID), electronic attacks, direct energy attacks, electronic harassment, brainwashing, brain entrainment (e.g. binaural beats), brain signatures, mind reading, voices in the head (e.g. voice-to-skull or V2K/V2S technology (Frey Effect / microwave hearing effect), and voice-of-God technology), Tempest brain monitoring, electronic body control, electronic implants and brain state control / brain state monitoring, Manchurian Candidates, and similar technologies and their countermeasures.
Microwaves, and ultrasonic sounds and infrasonic sounds require the specialized device-types we provide (described below) to detect and countermeasure them because they can't be sensed by normal human senses and their directions (many are highly directional), bandwidths and ON times must be first determined before they can be documented or countermeasured (note that infrasonic sounds appear to be omnidirectional, thus location-finding can be very difficult, and infrasounds are thus also very hard to countermeasure, especially if source is distant). You may need to prove the existence and specific timing and location of the mind control and electronic attacks (within the applicable statutes of limitation), and then correlate your manifestations with these attacks against you. Even then, to obtain substantial results you would have to show that you mitigated the mind control and electronic attacks to minimize your injuries, such as by jamming it (which requires specialized electronic attack and mind control countermeasures equipment of the types we also provide), and/or shielding against it. And if you do all of this yourself as soon as you can, you stand a much better chance of getting law enforcement to take a serious look at your case as well. In virtually all cases, YOU, AND YOU ALONE, must obtain justice in these types of cases (see our Mind Control webpage for specialized equipment). You might fairly ask, "How can I document mind control and electronic attacks using your specialized equipment?" Permanent directional-recording and time-stamped recording circuitry are very expensive because they add complications to any device made by anyone. However, there is a cheap, easy and very credible way to do this. Use a video camera and make a videotape or video disk of your experiences, which will document your equipment set-ups, and its responses. Most modern cellphones have videotaping capabilities. Leave a visible TV ON in the background and an accurate clock so that you can also time- and date-stamp your videos. And/or have a reliable and credible witness(es) with you.
DISCLAIMER: OUR MEDICAL/DENTAL POLICIES REGARDING ALL OF OUR OFFERS FOUND EVERYWHERE: NOTE: The term, "Medical" and related terms in all of our webpages, include ALL medical fields, including, but not limited, to ALL dental fields. While we do recognize as a simple fact of life that once a buyer buys any device from a seller, the seller has no control over what the buyer may actually use the device for nor does the seller assume any responsibility to anyone if the device is misused or abused, and that people have the right to choose whatever form of medical care they prefer, we are not licensed to practice medicine, and therefore we cannot and do not provide any medical advice, medical opinion, make medical claims, nor scientific claims, nor tell you what the causes are for any medical-like manifestation; nor anything we may provide you is to be used for a medical prevention, diagnostic, treatment, cure or medically-assistive reason; nor to in any manner stop, interfere with, change or replace any medical procedure or drug prescribed or likely to be prescribed for you by any trusted licensed medical entity. All medically-related statements which may be made by us are lay, anecdotal and personal opinion type statements only. If you are suffering from medical-type manifestations, we always recommend that you first obtain a complete medical exam from trusted medical professionals (at your expense) to eliminate all medically-caused manifestations. Furthermore, we cannot produce a device which is intended or likely to be used as a weapon, to retaliate against anyone or which inflicts injury, pain or suffering to any person or animal, or which is otherwise illegal, unethical or immoral. So please do not try to contract us for any device to treat, cure, diagnose, prevent or assist a medical condition, is likely to harm any person, animal, or property of others, or likely to be illegal, unethical or immoral.
HOW TO PICK THE RIGHT DEVICE TYPE FOR YOU: If not a medical condition, your manifestations may be caused by several different electronic attack / mind control scenarios. You must analyze your situation, by asking yourself and answering these questions: (1) When do these manifestations occur? (2) Where do they occur? (3) Do the manifestations follow you all over? (4) Do they occur all together, or do you get one or some sometimes and another or others other times? (5) Is there anything you are doing which changes their intensity and/or frequency either up or down? (6) What is your body position when they occur? (7) What activities are you engaged in at the time? (8) Do you have any idea where the offending transmitter may be located and/or who operates it? (9) If you place a heavy wool blanket or sweater over your head, do they still occur? (10) If you place a large and deep steel pot over your head, do they still occur? (11) Have you observed any unusual or strange behavior by those suspected? (12) Is their behavior a predictor of a current, past or an upcoming attack? (13) Is your behavior a predictor of a current, past or an upcoming attack? (14) Is there anyone else around you or in a similar situation who you know of also experiencing similar manifestations? (15) Do other people, pets or other animals around you act differently just before or while you are experiencing your manifestations? (16) Are you receiving electrical shocks when you touch metal surfaces or run water? (17) What have the police, FBI, FCC, your doctor, etc. tell you about your manifestations? Please note that as policy we cannot recommend any device type as a device type which will stop your manifestations - this decision is left totally up to you. While we do guarantee that any device we provide you will electronically function as specified, since we have no way of being able to ascertain your situation ourselves, we cannot guarantee that the device will lessen or stop your manifestations.
ADD A NEW ELECTRONIC FREQUENCY COUNTER TO YOUR CUSTOMIZED DEVICES: Many of the Device-Types described herein automatically come with displays. These displays may consist of meter-type digital readouts, analog readouts or LEDs. Now you can add a new small and portable Electronic Frequency Counter (EFC) to any Customized Devices (CD) device you contract for with us (includes, but not limited to the Device-Types described herein) which processes or produces a sinewave, square wave or triangular wave between 0.009 Hz and 99,999 Hz. Be sure to specify an EFC for YOUR device CDAF (green link at top of webpage is CDAF; only $99 extra for the EFC, $49 extra to modify each device to be EFC-capable). With an EFC, you can monitor the entire effective air bandwidth for infrasonic, audio and ultrasonic sounds, as well as electromagnetic signals within this same bandwidth - including brain wave frequencies and many power, servo and control frequencies! This should greatly increase your data and documentation, and is especially useful for tracking and analyzing mind control, electronic attack, radionics, audio, power, servo, control and other signals. Since the EFC comes as a separate module which plugs into your CD devices, all you need is one EFC for all of your EFC-capable devices, PLUS you can use your EFC for other non-CD devices and uses. We can sell you the EFC by itself custom-modified with battery holder and ON/OFF switch, if you wish, and with any of these types of signal connections: RCA, phone plug, miniphone plug, BNC, USB, spade lug, flat lug, ring lug, banana, pin, barrel plug, bare wire ($249 + S/H ($6.90 USA S/H)).
Introduction to this Page
Customized Devices Application Form (CDAF) Webpage
The ULTIMO EMF & ULTRASONIC HEAD SHIELD PROTECTOR:
Ferromagnetic head shields (brain shields) are the best and most cost effective
methods to protect the human brain from being read and tampered with using electromagnetic
fields or ultrasonics. This (UEMF&UHSP) is our most advanced and
improved version of our popular head shield / brain shield. The UEMF&UHSP is
head shielding (brain shielding) which protects the head and brain of the protected
Targeted Individual from virtually all of the exposure he/she experiences from
EMFs (Electrical Fields and Magnetic Fields) and
ultrasonic attacks to the brain (those which may cause remote
mind control / thought control, behavior control, thought monitoring, voice-to-skull
(V2K, V2S), mind reading, remote neural monitoring (RNM), forced "voice
of God" hallucinations, mind games, disorientation, pain manipulation,
etc.), brain scans, brain tracking and brainwave signature readings.
And if you are afflicted by a head implant(s), it also protects against the
electronic implant(s) from communicating with outside devices using radio frequencies
(e.g. microwaves, RF) and ultrasounds.
Caution: You cannot adequately shield your head by wearing a head covering with aluminum foil because your face is still exposed, and aluminum foil does not shield against dangerous magnetic fields. In fact, such a cartoonish aluminum foil cap / aluminum foil beanie much worsens frontal attacks because the offensive signals pass through your brain from your face to the back of the skull, and then reflect off of the metallized cap/beanie to pass through your skull and brain again from back to front in a much more focused form because the rounded shape of the metallized cap/beanie is very similar to that of a parabolic dish and thus will likely focus electric fields and ultrasounds in or near the brain's frontal lobe, the cognitive center of the brain.
Here is how this UEMF&UHSP CD project works: (1) Send us your CDAF (green link at top of page). (2) When we respond with time and cost estimates and you agree to these estimates, obtain* a padded motorcycle helmet, football helmet, aviator helmet or similar of your choice which best fits your head well and comfortably and that you like (at your expense; some bike helmets may not work well) for your helmet head shield / brain shield (helmet should be new or in excellent used condition). If you intend to sleep with the helmet On (many reports of TIs being electronically attacked during sleep), obtain a helmet also safe and comfortable for you to sleep in. (3) Ship to us* (at your expense) your chosen helmet. (4) We will then custom-modify it here with both EMF and ultrasonic shielding. (5) Upon successful completion, we will then return your customized helmet shield protector to you. *NOTE: We can also buy the helmet for you - especially nice if you live overseas, to avoid delays and large extra S/H. Just provide us the make, model, size, style and color of the helmet (and helmet seller URL if you can) you want in your CD Application Form (CDAF).
To shield the front of your helmet to protect your head from frontal attacks, we place a metal screen in the normally open helmet visor area (screening is used so that you can breathe and see; the helmet's visor should be removable). This screening material will to some degree limit visibility (like looking through a window screen ). Therefore, we do not recommend that you wear the helmet when driving, operating equipment or doing anything else that requires optimum vision or balance (however, if you do fall or bump into things with the helmet On, it should at least provide your head considerable protection from injury). Also, we do not recommend that you stand or walk with the helmet On during times you may be unsteady on your feet. Do not wear this shielded helmet protector without an assistant standing by if you have or develop a breathing disorder or panic attack disorder which the helmet may aggravate during use. Last made $1295 [3 lb (depends on helmet you select)].
The ULTIMO MINI HEAD SHIELD CAP:
The UMHSC is a smaller, lighter and less conspicuous version of the UEMF&UHSP,
as described above. While the UEMF&UHSP is extremely effective to
protect TIs from EMF and ultrasonic attacks to the head, some consider it to
be too conspicuous to be worn in public, and have asked for a cut-down version
which can be secretly worn in public without being conspicuous. The UMHSC
is the answer! The UMHSC also shields against both EMF and ultrasonic
attacks because it uses the same shielding materials as the UEMF&UHSP.
The UMHSC consists of two caps or hats, a larger cap/hat worn on top
of a smaller same-version cap/hat. In between the two caps/hats, we install
the shielding materials. The bottom cap/hat comfortably fits your head while
the larger top cap/hat conceals the shielding material between the two, which
is cemented to the two caps/hats. If both caps/hats have a bill (e.g. baseball
caps) or rim, we cut off the bottom bill or rim unless you tell us not to in
your CD Application Form (CDAF).
Because the UMHSC does not cover the face area and perhaps some of the sides and back of the head (head coverage depends upon the caps or hats you pick), while it is effective for the covered areas, the UMHSC is not going to be able to protect the non-covered areas. However, even this limited head shielding should be effective against brainwave signature reading (used to locate TIs for targeting) and mind reading (where a clean EMF signal is transmitted thru the frontal brain and received by a receiver on the opposite side to demodulate out the brainwave signals), as well as reducing the effectiveness of other forms of electronic attacks enough to prevent any or at least enough of the manifestations to thwart or discourage the perps doing the attacks.
Here is how this UMHSC CD project works: (1) Send us your CDAF (green link at top of page). (2) When we respond with time and cost estimates and you agree to these estimates, obtain* two same-version non-elastic caps or hats of your choice. The bottom cap/hat should fit your head snugly and comfortably, and the top cap/hat should be of the same type but 2-5 sizes larger (at your expense; there should be 3/8" - 3/4" of all-around spacing between the two caps/hats; both caps/hats should be new or in excellent used condition). If you intend to sleep with the caps/hats On (many reports of TIs being electronically attacked during sleep), obtain caps/hats also safe and comfortable for you to sleep in. (3) Ship to us* (at your expense) your chosen caps/hats. (4) We will then custom-modify them here with both EMF and ultrasonic shielding. (5) Upon successful completion, we will then return your customized cap/hat shield protector UMHSC to you. *NOTE: We can also buy the caps/hats for you - especially nice if you live overseas, to avoid delays and extra S/H. Just provide us the make, model, size, style and color of the caps/hats (and cap/hat seller URL if you can) you want in your CDAF.
Last made $795 [2 lb]. For optimum head protection, we strongly recommend that you contract both for the UEMF&UHSP and the UMHSC to better meet your various activities (only one CDAF required to contract for both).
MIND CONTROL & ELECTRONIC ATTACK ANALYSIS
REPORT: Are you a Targeted Individual
(TI) being attacked by perpetrators using mind control and electronic attack
devices? There are so many signals out there being absorbed by your brain and
body, while most are not malicious, how can you tell for sure which signals
are harmful or malicious to you? Due to popular demand, we are now offering
our MC&EAAR service. How this works is that you provide us your data points
on the signals you receive using either a detection device we provided you as
an earlier separate unique CD Project (see below for detailed
descriptions of our popular mind control and electronic attack detection device
types) or from your own signal detection equipment. We then objectively
analyze your data points, and provide you a written report on our analysis of
your data points. Your "data points" consists of the detected signal
details and the resulting manifestations which you believe were caused by the
detected signals. "Detected signal details" consists of the signal
frequency, signal strength or signal power (e.g. LED bar readouts,
volts/meter, dbm, gauss), direction (if you used
a directional antenna) and duration, and the date and time of signal
detection. "Resulting manifestations" consists of the physical, electronic,
electrical and/or equipment manifestations you experienced shortly after or
during a signal exposure, the duration of the manifestations, and date and time
of manifestations. One "data point" consists of one line of detected
signal details for each detected signal followed by one line of your observed
resulting manifestations. Please also include the make and model of your detection
device, a sketch(es) of the layout of the place where you experience these signals
showing your equipment setup, and any other relevant information which you believe
would assist our mind control and electronic attack analysis for you.
Last made $995 [1-5 lb] for up to 100 data points (if your data points exceed 100, add $75 for each additional 10 data points) you need analyzed. (NOTE: We provide a 10% discount for our MC&EAAR services if your detection device is one which we provided you earlier as a separate CD Project (detailed descriptions of our popular mind control and electronic attack detection device-types below); the estimated costs by us is for the analysis and report only, it is not a retainer of any kind and does not include any mind control or electronic attack expert witness services or any other services (if you require additional services from us, you must provide us a new CDAF form for each additional service for us to consider), it does not include any hardware of any kind, and it does not include any onsite visits (we do not personally meet with Clients) or travel by anyone; our analysis is solely based on the information provided to us by the Client with his/her CDAF and assumes that the Client's information is 100% accurate and complete; Client assumes full responsibility for the accuracy and completeness of all of his/her information; our analysis shall be objective, unbiased and with an open mind even if it differs with the Clients own opinions or analysis; we will not identify any alleged perpetrator(s) or their motives or intentions as that is beyond the scope of our direct knowledge; and Client's costs are totally non-refunable once we have completed our analysis).
WIRING HITCHHIKING HARASSER ELIMINATORS:
Are your home/business wiring, piping, etc. or even car wiring hijacked to electronically
harass or surveil you by hitchhiking signals onto them? Because power and telephone
lines, and metal pipe (e.g. plumbing), metal tubing (e.g.
wire shielding) and metal linear structures (e.g. rebar,
girders, conduit, trim, rails, fencing) surround you virtually everywhere
you go in any building, electronic surveillance devices, equipment control devices,
mind control devices and electronic attack devices can be connected to them
in virtually every room and even outside the building for some distances - these
omnipresent conductors serve as the optimum means to connect up, transmit and
distribute these very harmful electronic surveillance, mind control and electronic
attack signals throughout the building (sometimes called "carrier
current" attacks - carrier currents caused by carrier current transmitters)
- optimum conductors for virtually endless varieties of bugs, taps, harassment,
control and line blaster devices. Our WHHE devices
both test and filter out harmful hitchhiking signals!
Since these conductors are so prevalent in virtually every building, added with the technologies of time multiplexing signals and frequency multiplexing signals, literally dozens - even 100s - of these types of very harmful signals can be operational on any day and night against you - usually no matter what rooms you are in. Your home or business is just several huge signal distribution networks plus transmitting and receiving antenna arrays. And all such wiring, piping, etc. can usually be just as easily abused for electronic surveillance, mind control and electronic attacks even if you turn OFF or disconnect them from their normal uses (e.g. turning Off AC power, disconnecting phones). This is nothing new - both power and phone wiring have been lawfully used for decades to carry high-band voice, control signals, and data (e.g. faxes, modems, DSL, zons, intercoms, alarm systems for phone lines, and intercoms and alarm systems for power lines) - proven technologies using common household AC wiring and phone wiring. Furthermore, because generic power and phone wiring and piping in all or part of one's home and business are often unshielded, they can be both easily accessed and connected up to AND used as a huge transmitting and/or receiving radio antennas to communicate with anything from electronic implants - to guys parked in the street - to cellphone towers down the road - to control centers 100s miles away - to ships at sea - to satellites - to electronically harass, control and/or interfere with your life! For examples: (1) Signals on them can be transmitted wireless for miles, and (2) Physical access to the wiring, piping, etc. is not even required; because the wiring, piping, etc. is unshielded, signals can often be inductively coupled into or out of power lines, phone lines, piping, etc. (e.g. inductively-coupled phone line taps are decades old technology). Offending microwave signals can also be reflected off of ungrounded or not fully grounded metal bodies.
Since these virtually endless varieties of bugs, taps, harassment, control and line blaster devices can take on virtually any appearance and/or be hidden in just about anything inside of or near your building, they can be very difficult to detect through physical searches (short of tearing down all of your walls and ceilings where the lines and piping run, and disassembling all of your equipment). For example, these devices can be easily concealed inside TVs, radios, computers, cellphones, landline phones, electronic handheld devices, etc. - fully operating even when the TV, radio, phone, etc. itself is not turned ON. Or hidden in an outlet, inside of your wall or in your attic - even inside your car. If you share walls, floors or ceilings with other apartments, the devices can be on their side, or even outside your building. Since not all of these harmful devices are RF devices, the non-RF ones cannot be detected using TSCM field strength testing used for wireless systems. Nor can strictly receiving devices be TSCM-detected. And usually nor can transmitting devices which transmit in bursts, randomly or pre-dawn hours, nor when the perpetrator believes the area is being electronically swept and turns Off transmitters until the TSCM crew leaves. In short, your phone and power wiring, piping, etc. can be easily and secretly tapped into using hardwired, inductive-coupling and/or reflection techniques just about any place they are routed internal or external to your home/business. To understand just how frustrating it is even for experts to really troubleshoot an area, rent the Gene Hackman movie, "The Conversation" - and that was early 1970s' relatively crude, clunky and huge electronic surveillance systems!
The high-band signal frequencies used on power and phone lines, piping, etc. (which can be time multiplexed and/or frequency multiplexed to support several such systems) are usually 5+ times higher than the standard 60 Hz / 50 Hz (power wiring) or 3200 Hz maximum (phone wiring) bandwidth normally used on them. The usable bandwidth of many power and phone lines exceed 2 MHz for loops up to about 6,000 ft (1.14 miles) and much higher over much shorter loops - very usable for electronic surveillance, mind control and electronic attack. Metal piping, tubing, fencing, rails and other structures can conduct signals far higher in frequency than even power and phone lines (because most power and phone lines, pipes, etc. are unshielded, electrically noisy and inductive and leaky to high freqs, most high-band signals are under 200 KHz). Loading these unshielded conductors with all kinds of multiplexed and high-band signals they were not designed for may cause the wiring, piping, etc. itself and their terminations to resonate with strange sounds and noises which seem to emanate from walls and ceilings often on quasi-random and directional bases (e.g. strange sounds you can hear when standing in one position but not in another nearby position, and/or at some times and not at other times, and/or during certain conditions of humidity and/or temperature but not at other conditions), often throughout most of a building, and often similar to the vibrating and humming of an old or defective power transformer. They can also vibrate and hum in the ultrasonic and infrasonic bandwidths when signals mix and produce sum and difference frequency components. The weird sounds can also sound like a distant motor running, distant voices, whispering and mumbling, spiritual and God-like voices, high-pitched voices, low-pitched voices, chattering, music, animal sounds, whistles, echoes, pulsing, pounding, popping, finger-snapping, digital data sounds, zinging sounds, whooshing sounds, theremin sounds, etc., especially when real time complex signal mixings of possibly several signals at once result in partially demodulated and/or multiply-mixed high-band signals. These weird noises can literally drive some people nuts! If you are hearing sounds, noises or even voices or digital data signals or control signals coming from your walls, ceilings or appliances or inappropriately while you are on the phone, you may not be imagining it. Also, high frequencies imposed on power wiring can adversely affect induction motors (especially compressor motors common to refrigerators, freezers and air conditioners), causing them to operate roughly, chatter noisily and possibly stall out (because induction motor speed is proportional to the frequency of its power source, multiple frequencies can harm them), and can cause lights to vary in intensity or flicker. Modulated high frequencies on phone lines can cause malfunction of phone and computer equipment (e.g. loss of broadband sync, inability or slowdown in using DSL or even dial-up, faxes, zons, etc. because of a "noisy line").
We offer 4 types of WHHE systems to test for and protect against offending EMF signals: (1) The WHHE1 is for AC power lines, (2) The WHHE2 is for phone lines, (3) The WHHE3 is for motor vehicle wiring, and (4) The WHHE4 is for non-electrical metal structures, such as pipes, tubes, appliances, fencing, rails and other metal structures, and unpowered wiring. For minimal recommended protection, you must typically have at least one of each WHHE type. For optimal and continuous protection, you must have two WHHE1 (one for each 120VAC power leg), one WHHE2 for each landline phone line, one WHHE3 for each vehicle, and one WHHE4 for each non-electrical ungrounded or improperly grounded metal structure within about 25 yards of you.
The WHHE1 is designed to plug directly into any 120 VAC wall outlet (3-wire or 2-wire, 60 Hz or 50 Hz) located virtually anywhere to both detect and eliminate these higher frequencies on your AC power wiring (and to also cause an improvement in your power factor if it is typically inductive or lagging power factor (PF)) (Note: If you have an intercom, digital or other communications system which uses home/business electric power wiring to transmit/receive signals, the WHHE1 will also filter out those signals if used at same time). For example, voice, data signals, and/or control signals at 10 KHz, 50 KHz, 90 KHz, ..., 1890 KHz, 1930 KHz and 1970 KHz could all be frequency multiplexed onto a single 60 Hz power line simultaneously. That is, as long as a WHHE1 is not connected, because the WHHE1 wipes out all frequencies much above 60 Hz - wiping out those electronic attack and electronic surveillance high-band signals in one fell swoop! You may specify the WHHE1 to be non-battery powered (used only on powered AC lines to also power it), or battery-powered (used on both powered and unpowered AC lines). Note that the WHHE1's filtering functions cannot be duplicated using commercial power strips with built-in transient suppression. Power strips with transient suppression only filter out transients which are both high-voltage AND high-frequency, and then only for those devices connected to the power strip - not the VAC power lines connected to your AC outlets and located behind your walls in your home or business. Only the WHHE1 can filter out unwanted signals at your outlets and home/business wiring (as well as devices plugged into power strips). Even for devices plugged into transient-protected power strips, the designed protection is for transients which are both high-voltage AND high-frequency - much less effective against hitchhiking voice, control and data signals (which usually result in small RMS voltage level increases way below voltage levels required to switch in transient suppression).
TEST: There is a test that will likely result in positive indication of hitchhiked signals on your AC power lines, but test requires about 2 months to complete: Obtain 3 same make and model plug-in digital clocks (not battery-powered clocks), and place them in widely-separated rooms but on the same 120VAC leg. Synchronize each clock to your cellphone or other battery-operated super accurate time source. At the end of one month, check the times on each of your 3 clocks against the device you synchronized them with. Most of these types of clocks are timed by the frequency of your AC line voltage (60 Hz in the US, 50 Hz many other places). However, with most of them, the timing is also advanced by signals and electrical noise interference on your line to various degrees based on their specific electronic designs and interference properties. If there is much communications or control signals on the line, the clocks will run faster than normal. Therefore, if at the end of the month, any of your clocks are more than a couple of minutes fast, more than likely, you have a serious problem with hitchhiked signals on your line for which we strongly recommend the WHHE1 to countermeasure. Since the electrical noise on most AC lines typically rarely reaches levels that would advance most clock timing, normally, noise by itself would contribute to about a minute or two at most in one month's time to advancing timing. If any of your clocks run too slowly, the clock is probably defective. And which clock has advanced the greatest is usually the clock closest to the hitchhiking signal input point where it gets the strongest signal. Then run this test again, with all of the clocks on the other AC leg. Note: This test is not proof of either the existence or absence of hitchhiking signals during the test month because of clock defects and nominal electronic differences; clock timing may use crystals and not line frequency; low intensity, very high frequency, and/or low duty cycle (e.g. burst signals, infrequent or occasional attacks) hitchhiking signals that don't significantly increment clock timing; very noisy line, etc., but it often is a very good indication.
The WHHE2 is designed to plug directly into any normal landline phone line (works with corded phones and cordless phones), and works whether the phone is On Hook or Off Hook to eliminate higher frequencies on your phone wiring (Note: If you use DSL, modem or other digital phone line communications system, those signals will also be filtered out if used at same time). We offer 3 versions of the WHHE2: (1) WHHE2-HB: The High-Band (HB) version (the default version if you don't specify) filters out phone line freqs starting at about 4000 Hz and above. While the HB will filter out all signals at all times when toggled ON much above the normal phone voice BW of 300-3200 Hz, it will not filter out normal speech signals in the voice BW, resulting in possible but very unlikely unauthorized voice-band transmissions when phone is on-hook. (2) WHHE2-LB: The Low-Band (LB) version filters out phone line freqs starting at about 50 Hz and above. While the LB filters out voice and data signals at all times when toggled ON, it must be turned OFF when you need to talk on the phone or use it to transmit data or it will also filter out your and the other party's voices. Note that the LB version may negatively impact ring with some phones. (3) WHEE2-CMP: The Composite (CMP) version allows you to toggle between the HB and LB versions for maximum security - when you are talking on the phone, you set it at HB, when you are sending data online, you turn OFF both HB and LB, and when phone is on-hook, you set it at LB. The WHHE2 uses the common standard RJ-11 phone connector. The WHH2 always comes battery-powered.
The WHHE3 is designed for 12VDC battery systems (e.g. vehicle battery wiring) because car battery wiring can also be - some say often - used to conduct unwanted and harmful signals which can be used for electronic surveillance, mind control and electronic attack. You can specify whether you want its cable to have cigarette lighter, battery clamp or other type of terminating connector you specify (Note: Any and all vehicle underhood connection work must be done by your automechanic at your expense and always in a legal and safe manner, and we assume no liability for the installation, removal and use of a WHHE3 device on any vehicle). You may specify the WHHE3 to be non-battery powered (used only on powered 12VDC lines to also power it), or battery-powered (used on both powered and unpowered 12VDC lines).
The WHHE4 is designed to test and protect unpowered wiring, metal piping, metal tubing, metal fencing, metal railing, metal structures, and other unpowered conductors up to about 25 feet long by testing for and filtering out signal types they carry above 60 Hz. These include offending signals hardwired or induced onto metal structures, and to some extent, reflected signals. Protecting against reflected signals is designed to protect you from perps transmitting RF signals at unprotected reflective surfaces near you for its scattering effects or angular advantages, which then reflect onto you to do their dirty work; the WHHE4 grounds out air-transmitted offending RF signals it protects in your area. The WHHE4 can test and filter out great varieties of conductors which do or do not have known or accessible signal return paths (WHHE1, WHHE2 and WHHE3 test and protect circuits which have electrical return paths paired with them, e.g. AC power line neutral, phone Ring wire, car battery ground). The WHHE4 comes with two cables, each about 12.5 feet long, and each terminated by alligator clips (or some other type of connector you specify). One cable is connected to the unpowered metal wiring, piping, tubing, fencing, structure, etc. If this metal is accompanied by an accessible metal electrical return path (e.g. wire, piping, tubing, fencing, structure, etc.), the other cable is connected to it, else it is connected to nearby grounded metal, in which case an earth ground rod may be required (earth ground rod not provided, available in hardware stores). The WHH4 always comes battery-powered. Note: Not all plumbing or tubing (or fencing or structures) is continuous metal all the way into a good earth ground. Sometimes plastic plumbing or standoffs are used, which breaks any ground connection. Even if the plumbing pipe is continuous metal all the way to where buried in earth, pipe joints can be corroded enough or use enough teflon tape to break the electrical connection, the pipe can be laid in dry ground or concrete, and/or the pipe itself can be corroded enough to break its ground connection. In fact, plumbing pipe is never a reliable earth ground. National Electrical Code: 'True earth ground physically consists of a conductive rod or pipe driven into the earth to a minimum depth of 8 feet.' Plumbing pipe is never "driven into the earth" and plumbing, tubing, fencing and structures are seldom buried at least 8 feet deep. If unpowered metal is not itself solidly grounded to earth (easily determined) - not just wet-season or intermittently grounded - it makes a great conductor for offending electronic signals.
Each WHHE device comes with a signal indicator LED and the DETECT/PROTECT toggle switch. One toggled position is the DETECT Mode in which the LED will flicker and/or brighten if there is a high-band signal on the line, piping, etc. The other toggled position is the PROTECT Mode which will filter out all types of high-band signals, transients and line noise interference hitchhiking signals to remove them from your line, piping, etc. The DETECT Mode continuously tests your conductor to determine if there is any unusual signal or other electrical activity on it. The toggle switch is especially protected with a snubber circuit designed to prevent contact arcing during switches. If the WHHE device conflicts with some other known and OK equipment or function connected to your wiring in the PROTECT Mode, then don't operate that WHHE in its PROTECT Mode when normally using such equipment or function (no known interferences in the DETECT Mode).
EXTRA PROTECTION: WHHE devices are designed to further protect your lines from possibly destructive high-voltage pulses, transients and line noise which can sometimes also occur, whether natural or manmade (e.g. helps protect you from a perpetrator trying to wreck your phone or power system - even your computer - using a phone or power line blaster to deliver high-voltage transients, pulses and electrical noise to your system and equipment; and helps protect lines and equipment against damage caused by nearby lightning strike or transients, pulses and line noise). (Note that while electronic filters may eliminate 99.9+% of a signal - so much of the signal that the tiny remaining signal is lost in the line noise - no electronic filter wipes out absolutely 100% of a signal; always experiment with WHHE device first to make sure that it does not interfere with the normal use of your lines and equipment.). This very substantial added transient protection feature includes a gas discharge lightning arrestor (surge arrestor - not normally found even in expensive transient-suppressed power strips), a MOV (varistor), and the filter capacitor itself - all of which adds substantial protection from lightning strikes, line blasters, and powerful pulsed mind control and electronic attack devices hitchhiked onto your lines, piping, etc.
Plus, if specified, WHHE devices come with an output connector which permits you to directly view hitchhiking signals on an oscilloscope or hear them on a speaker or earphones (if signal is in the audio band; oscilloscope, speaker and earphones are not included). By being able to observe and/or hear the signals which should not be on your line, piping, etc., you can often tell exactly what is being communicated or controlled, and correlate the hitchhiking signals with conversations, other activities, and unexplained manifestations.
Note that since most home and office electric power systems are 220-240 VAC and standard outlet wiring is 110-120 VAC, there are two isolated AC power "legs" that power the various 110-120 VAC outlets and functions throughout the building. Therefore, to simultaneously and continuously DETECT and PROTECT both AC power legs, you need two WHHE1 devices. Also note that if your landline phone system has more than one phone line, each phone line is isolated from each other, so therefore to simultaneously and continuously DETECT and PROTECT all phone lines, you need a WHHE2 for each and every phone line. All WHHE device-types are small, portable, easy to use, uses standard connectors, and the WHHE2 and WHHE4 are 9VDC battery-powered (WHHE1 and WHHE3 operate off of their power line voltages but we can also make them to operate off of 9VDC battery to also test unpowered 120VAC power lines (WHHE1) and car battery wiring (WHHE3)). CAUTION: Do not use any WHHE device in the PROTECT Mode to do a denial-of-service attack against anyone legitimately using a phone system or power line for some normal high-band activity, for example, by interfering with or defeating DSL, modems, faxes, zons, intercoms, alarm systems, etc.
Non battery-powered WHHE1, WHHE3. Last made $395 [1 lb] each.
Battery-powered WHHE1, WHHE2-HB, WHHE2-LB, WHHE3. Last made $445 [1 lb] each.
Battery-powered WHHE2-CMP, WHHE4. Last made $495 [2 lb].
The ULTIMO EM TRANSMITTER DIRECTION FINDER:
If you are being electronically attacked, electronically harassed, electronically
controlled, electronically tracked, and/or electronically surveilled through
some wireless means, the signal is either electromagnetic (EM) or ultrasonic
(see below) in nature. There are all kinds of commercial EM scanners which will
allow you to scan for the presence of EM signals. However, they almost never
come with directional antennas (they usually have only an
omnidirectional whip antenna) so that while using the whip antenna
you can pick up EM signals and display the strongest EM signal coming to you
from any direction, they cannot determine signal direction - only signal frequency
and signal strength. Furthermore, since the standard whip antennas used in commercial
scanners detect signals from all directions, a stronger EM signal(s) with a
nearby center frequency(ies) (e.g. licensed ham and/or commercial
radio stations and/or TV stations) to an electronic attack signal
will cause the scanner with the standard whip antenna to detect it/them instead
of the offending signal. However, because our UEMTDF comes with our proprietary
highly directional antennas, when pointed in the offending signal's direction,
often result in the clear detection and direction finding of offending signals
- even when more powerful non-malevolent (e.g. licensed commercial
stations, ham, cb) transmitters are operating in the same area, at
the same time and at nearby frequencies. This is critical because electronic
attack transmitters are often designed to operate in the "electronic shadows"
of stronger legit signals, such as commercial TV stations and radio stations,
to electronically hide them from scanner/whip antenna detection. Furthermore,
commercial scanners come with no instructions on how to interpret the received
signals in the realm of electronic attack, mind control and body control technologies.
Because of the variety of directional antennas that we include and our User
Manual insights about their uses, the UEMTDF can be used to detect and determine
the direction of not only relatively distant external signals, but also nearby
and even internal signals transmitted, for example, from an electronic implant(s)
(for modern electronic implants and most other localized transmitters,
it is usually very helpful to be able to detect both internal signals and external
signals because modern electronic implants, room bugs, vehicle tracking transmitters,
possibly telecoils/magnetic induction loop systems, etc. are often in two-way
communications with much larger external transceivers which control them; electronic
implant control is often based on the received biomedical data supplied by the
electronic implants - data which is often biological result of previous control
signal instructions from the external transceivers often in a closed-loop feedback
type system). Other nearby signals the UEMTDF is designed to both
detect and find include room bugs and tracking transmitters often concealed
on vehicles, clothes and portable objects. The UEMTDF comes with a commercial
scanner of our choice based on the description of your needs, plus 5 unique
directional antennas of our design, plus description of both how to use the
directional antennas and how to interpret as best we know the detected radio
signals, including "radio static" that is often missed even by professional
bug sweepers (detection is contingent upon the existence of
a transmitter transmitting an adequate RF signal at the same time and direction
you are trying to detect it). NOTE: We will
refund 25% of your payment for this device-type if within 60 days of you contracting
for one you also contract for a PERSONAL EMF JAMMER (PEMFJ)-type
device because you needa highly
directional RF signal detector to try to
ascertain the frequency, direction and timing of the harassing or attacking
EMF so that we can optimally design the PEMFJ for
you, and also so that you can prove to yourself that your PEMFJ
is transmitting radio signals. Last made $1195 [3 lb].
ANTENNAS LIMITED TIME SPECIAL OFFER: We recently made major changes in our antenna designs, applicable to all new UEMTDF and UEMTT (below) CD projects. While we got good reports from our earlier antenna variations, our two largest antennas were relatively bulky and heavy, limiting portable use of them by some users. Our newest antennas are much smaller and lighter and thus easier to use. As a special consumer service, if you purchased from us an UEMTDF or UEMTT device-type since Oct. 18, 2007, we will provide you this new set of our unique 5 directional antennas for estimated $395 per set of 5, plus the return to us of all of your original antennas in good condition. Your cost for these new antenna types is less than half of their cost component for new UEMTDF or UEMTT CD projects. To obtain these new antennas, please promptly email us your interest in this deal, and complete a new CDAF for them (green link at top of page, evaluation fee waived), and send it to us with your payment (non-refundable 1/3rd downpayment minimum) and original antenna set of 5 antennas. Please allow 30 days from our receipt of your mailing. Note 1: This is not a refund offer or system exchange offer - but an antenna exchange offer only - so please do not send anything else back to us. Note 2: First posted Oct. 19, 2009, we may discontinue this offer at any time without prior notice or liability, so if interested in this deal, please email us promptly, we will honor those who earlier emailed us showing interest and then provided us his/her CDAF, payment and antennas within 30 days of email. Note 3: All of our policies fully apply as usual.
The ULTIMO EM TRANSMITTER TRIANGULATOR: The UEMTT consists of two matching UEMTDF systems (above), plus additional instructions on triangulating EM transmitters. While the UEMTDF will provide you EM transmitter signal strength, signal frequency and signal direction, it will not directly specifically locate the signal transmitter. To best determine specific location of transmitter, you need to triangulate the signal, and that requires two UEMTDF systems. In addition to the User Manual, for all triangulation device-types we sell, we also provide a tutorial on signal triangulation with a completely worked-out example problem using our simple algebraic plug-in formulas. NOTE: We will refund 25% of your payment for this device-type if within 60 days of you contracting for one you also contract for a PERSONAL EMF JAMMER (PEMFJ)-type device because you needa highly directional RF signal detector to try to ascertain the frequency, direction and timing of the harassing or attacking EMF so that we can optimally design the PEMFJ for you, and also so that you can prove to yourself that your PEMFJ is transmitting radio signals.Last made $1995 [6 lb].
The PERSONAL EMF JAMMER: John Williams's extensive researches into EM weaponry and EM harassing devices (and Radionics) - including on-site investigations of cases - have resulted in a high level of understanding and insights into EM weaponry and electronic countermeasures (EM weapons countermeasures), such as EM jammers and EM zappers. The technology for powerful and invisible EM attacks clearly exists - attacks aimed at harassing, controlling, crippling, and "poisoning"! Do you:
And you are certain that these manifestations
are not caused by any medical condition. You may be the victim of an electromagnetic
PEMFJ-type devices, as with all RF transmitting devices we design and build, is based on our RF policies defined on our policies webpage (policies.htm). The PEMFJ is designed to send out strings of pulses in a narrow bandwidth (0.1% of center frequency, up to less than 100KHz maximum BW) designed to jam (within the immediate area of one's body) offending EM transmitters, surveillance devices, microwave controllers, et al - even the newest EM devices. Portable and worn or carried on or near the body. Note that EM signal jammers are never designed to operate as electronic weapons or to jam legally licensed transmitters. Jammers transmit no intelligence but only a high-frequency carrier signal typically modulated by white noise or pink noise to mask out the offending signals of an electronic weapon (if you could hear the EM white noise, it would sound much like distant rain; EM pink noise sounds similar to white noise but has higher or lower composite pitch, depending on filtering). In contrast, electronic transmitter weapons transmit definite control signals or data signals which are usually designed to cause harmful manifestations in a person(s) (usually a targeted person), animal(s), and/or equipment. Since the bandwidth that harmful EMFs can occupy is enormous, it is important to determine where in this enormous electromagnetic spectrum lies the signals harmful to you. Therefore, you should first strongly consider as a Customized Devices the purchase of a directional signal strength or signal triangulation device so that you can ferret out the offending signals red-handed, detect their frequency(ies) (bandwidth) and include those details in with your PEMFJ-type CDAF - see our popular THE ULTIMO EM TRANSMITTER TRIANGULATOR and THE ULTIMO EM TRANSMITTER DIRECTION FINDER -type devices above for a special deal. Last made $1495 [2 lb] (rough price when the bandwidth of offending signal was provided; if frequency was not provided, we select the frequency based on the best of our abilities resulting in less probability that we selected the right frequency and device may be substantially more expensive; we cannot do a wideband PEMFJ or a PEMFJ for certain frequencies).
The ULTIMO ULTRASONIC TRANSMITTER TRIANGULATOR: If you are being electronically harassed, electronically controlled or electronically attacked through some wireless means, the signal is either ultrasonic or electromagnetic (see above) in nature. The UUTT consists of two matching UUDAs (see ULTRA ULTRASONIC DETECTOR & AMPLIFIER (ULTRASONIC DIRECTION FINDER) described below, along with several other related ultrasonic type devices) so that you can not only determine an offending ultrasonic signal strength but also the ultrasonic transmitter's specific location using the signal triangulation methods we describe. In addition to the User Manual, for all triangulation device-types we sell, we also provide a tutorial on signal triangulation with a completely worked-out example problem using our simple algebraic plug-in formulas. NOTE: We will refund 25% of your payment for this device-type if within 60 days of you contracting for one you also contract for an ULTRA ULTRASONIC JAMMER (UUJ), ULTRA ULTRASONIC SHRIEKER (UUS), or ULTRA ULTRASONIC COUNTERMEASURE (UUC)-type device because you needa highly directional ultrasonic signal detector to try to ascertain the frequency, direction and timing of the harassing or attacking ultrasound so that we can optimally design the UUJ, UUS, and/or UUC for you, and also so that you can prove to yourself that your UUJ, UUS, and/or UUC transmits ultrasound.Last made $995 [3 lb].
The ULTRA ULTRASONIC DETECTOR & AMPLIFIER (ULTRASONIC DIRECTION FINDER): The UUDA is designed to detect and amplify the presence of ultrasonic sounds in your environment - from weakest to strongest (gain tunable 5,000 - 500,000), from 15 KHz - 225+ KHz. Automatic gain control (AGC) is used to extra-boost weak sounds over much stronger ones. Directional and tunable. Ideal for detecting ultrasonic bugs, ultrasonic pain field generators, ultrasonic spurious emitters, ultrasonic communications (will demodulate some), ultrasonic range finders, ultrasonic depth finders, ultrasonic medical devices, ultrasonic mind control devices, etc. The UUDA also comes with an ultra wideband ultrasonic transducer housed in a special highly directional feedhorn assembly that allows you to determine the direction where the offending ultrasonic signal is coming from. NOTE: We will refund 25% of your payment for this device-type if within 60 days of you contracting for one you also contract for an ULTRA ULTRASONIC JAMMER (UUJ), ULTRA ULTRASONIC SHRIEKER (UUS), or ULTRA ULTRASONIC COUNTERMEASURE (UUC)-type device because you needa highly directional ultrasonic signal detector to try to ascertain the frequency, direction and timing of the harassing or attacking ultrasound so that we can optimally design the UUJ, UUS, and/or UUC for you, and also so that you can prove to yourself that your UUJ, UUS, and/or UUC transmits ultrasound.Last made $595 [2 lb].
The ULTRA ULTRASONIC JAMMER: John Williams's extensive researches into ultrasonic weaponry and ultrasonic harassing devices (and Radionics) - including on-site investigations of cases - have resulted in a high level of understanding and insights into ultrasonic weaponry and electronic countermeasures (ultrasonic weapons countermeasures), such as ultrasonic jammers and ultrasonic zappers. Ultrasonic transmitters have several important uses. These include warding off feral dogs and dangerous pests (insects to rodents), and for ultrasonic communications, control, electronic weaponry (e.g. ultrasonic mind control / ultrasonic attack) and various ultrasonic laboratory applications. "Ultrasonic Jammers" are typically powerful ultrasonic transmitters designed to block or interfere with any intelligence or data transmitted by other ultrasonic transmitters operating in that band, if any, and to disrupt their ultrasonic control, communications, weaponry, and lab functions. Note that ultrasonic signal jammers are never designed to operate as electronic weapons. Jammers transmit no intelligence but only a high-frequency carrier signal typically modulated by white noise or pink noise to mask out the offending signals of an electronic weapon (if you could hear ultrasonic white noise, it would sound much like distant rain; ultrasonic pink noise sounds similar to white noise but has higher or lower composite pitch, depending on filtering). In contrast, electronic transmitter weapons, which we do not create, transmit definite control signals or data signals which are usually designed to cause harmful manifestations in a person(s) (usually a targeted person), animal(s), and/or equipment.
John Williams' extensive researches into ultrasonic weaponry and harassing devices (and infrasonic weaponry) have resulted in a high level of understanding and insights into ultrasonic weaponry and electronic countermeasures. The technology for powerful and invisible ultrasonic attacks clearly exists - attacks aimed at harassing, controlling, crippling, and "poisoning"! Do you:
And you are certain that these manifestations
are not caused by any medical condition. You may be the victim of an ultrasonic
Our popular UUJ also usually makes the best animal, pest and intruder defense systems because their-high powered ultrasonic cacophone outputs are most disturbing to them. The UUJ is designed to protect yourself from unwanted ultrasonic surveillance and control, ultrasonic harassment, and painful, debilitating and dangerous ultrasonic pain field generator and other ultrasonic weaponry attacks. Tunable frequency is a critical feature because different ultrasonic frequencies are used for different ultrasonic applications. Don't confuse the UUJ with commercial "ultrasonic pest controllers," as some of these transmit virtually no ultrasonic tones - only feint beeps modulated at about 10 KHz - while others transmit only one steady ultrasonic tone or short periodic ultrasonic beeps and therefore do not affect many different types of pests who are not sensitive to their one ultrasonic tone. However, the UUJ is tunable over a wide bandwidth of practical ultrasonic frequencies (about 15 KHz to about 50 KHz) to optimize it for its many ultrasound uses. See above for special deal in getting an ultrasonic detector with the UUJ. Last made $695 [2 lb].
The ULTRA ULTRASONIC DUAL WHISTLES JAMMER: The UUDWJ is a set of dual ultrasonic whistles joined together that you blow into to jam ultrasonic attacks against you. The UUDWJ produces highly intense ultrasonic random noise, spanning a large bandwidth of the practical air ultrasonic frequencies. The UUDWJ whistles are chrome-plated mechanical devices joined together as one unit. NO ELECTRONICS - NO BATTERIES - CANNOT BE COUNTERMEASURED BY ELECTRONIC ATTACK DEVICES - IS QUICKLY DEPLOYED - IS SMALL, LIGHTWEIGHT and INEXPENSIVE. One whistle covers the upper ultrasonic frequencies of the ultrasonic band, up to about 62.5 KHz (since ultrasonic frequencies above about 50 KHz have very high levels of attenuation in air, the UUDWJ covers the practical ultrasonic attack bandwidth); spillover into the audio range due to fringing effects is very small - we can barely hear it. The second whistle covers the upper audio band (i.e. treble band) and the lower ultrasonic band. Since it too transmits intense signals, its audio band part is very loud, making it also useful as a high-pitched audio sound whistle for many such purposes as well as an excellent part of an ultrasonic jammer whistle set. Works in air only - not a water ultrasonic sonar jammer. Last made $195 [12 oz].
The ULTIMO LED
MIND CONTROL DETECTOR: A relatively recent powerful form of mind
control and electronic attack is becoming increasingly popular. LEDs (Light-Emitting
Diodes) are omnipresent in many different types of common electronic equipment
for decades now, especially increasingly so with the advent of high-intensity
energy-efficient LED bulbs, LED lamps and other LED lighting systems. LEDs are
semiconductor light emitters which can be precisely programmed for specific
wavelengths, colors, tones and modulations, and have been used for years to
program astronauts sleep cycles in the Space Station. LED light usually appears
as constant (0 Hz frequency) or blinking or flashing at very low rates (usually
for alarm reasons). Older LEDs generally have such small bandwidths as
to be nearly useless for mind control and electronic attack uses, even LEDs
used in some LED biofeedback devices. However, some newer LEDs can be effectively
modulated with signals up to about 100Mb/s - way beyond the modulation bandwidth
required for mind control and way beyond the modulation bandwidths of all other
common light sources - not to mention cheap and commonly available - making
them ideal for mind control and electronic attack. Most electronic devices which
have LEDs are now foreign-made, so which LEDs are now programmed and how are
mostly unknown. You can't 100% block LED effects using dark sun glasses, and
if the LEDs are intense, even closing your eyes may not help much. And LEDs
can be intensely flashing you at such high frequencies and/or in the ultraviolet
band even when they appear to be Off to the eye (e.g. the
signal output LEDs used in TV controllers)! Because LED modulations
can be very high bandwidth, just by glancing at the modulated LED light may
be enough to entrain your brain, and some manifestations can be delayed, making
it difficult to determine the cause.
Mind control and electronic attack signals conveyed directly into the brain through the eyes and optic nerve pathways can be very destructive in several ways (e.g. direct interferences with nerve pulses, disruption or suppression of melatonin production, disruption of circadian rhythms, etc.). We now believe that many mind control and electronic attacks are being conducted through modulated LEDs flashing at such high rates that your eyes cannot detect these fast flashes but your brain does on a subliminal basis. You have no way of knowing without the ULEDMCD which LEDs may be attacking you and which are benign. And that while most of these LED mind control methods are clearly for commercial reasons (e.g. telling you to buy a certain product or avoid competitors), others are used directly for nefarious mind control and electronic attack applications. Modulated LEDs are also widely used for Visible Light Communications systems (VLC), including for the activation, programming and controlling of other electronic devices themselves directly involved in surveillance and spying, and mind control and electronic attack. In addition, flashing LEDs are believed to trigger or cause epileptic seizures, blinding headaches, chaotic thoughts, thought interferences, forced thoughts, perception alterations, insomnia, sleep disruptions, hallucinations, eye damage, temporary color blindness and distortions, loss of balance, depression, fibromyalgia attacks, behavioral modification, obsessive-compulsive behavior, and even psychopathic behaviors in some vulnerable people. You can be exposed to LED mind control or other electronic attack totally unaware of this type of electronic attack. Since your eyes won't likely detect it, you need a specialized device like the ULEDMCD to detect and alarm to LED mind control. The ULEDMCD detects LEDs which are outputting high-frequency signals (30 Hz - 200 KHz), indicative of some mind control, electronic attack and communications devices, and alarms you when detected. If detected and you own the offending device, you can tape over the offending LED with black electrical tape or paint over it with dark nail polish, disconnect the LED, report the device or take some other kind of action. The ULEDMCD last made was $595 [2 lb].
The ULTIMO MODULATED
LED CONTROLLER: The UMLEDC produces a very wide range of programmable
LED modulations, some of which may counteract mind control (not just LED mind
control), seasonal effective disorders, some sleep disorders and circadian rhythm
disorders (circadian disorders are believed by some to be
one cause of breast cancer in women), some mood disorders, biofeedback,
relaxation therapy - an excellent LED light therapy device. But unlike other
cheapo LED devices, the UMLEDC comes with critical programmable features:
(1) UMLEDC modulations are programmable (30 Hz - 200 KHz).
(2) UMLEDC output waveforms, duty cycles and intensities are also programmable. Output waveforms can be sinewave or pulsed, or based on audio, infrasound or ultrasound you connect into it. Pulse duty cycles can be varied 10% - 90%.
(3) UMLEDC comes with input connectors used by recorders, mikes and other electronic devices to modulate the LED light with audio, infrasounds and ultrasounds if you wish (input devices to the UMLEDC are not included).
With the UMLEDC, a huge amount of modulated-LED experimentation is possible (never use the UMLEDC as a mind control device, and the UMLEDC is not sold as a mind control device, nor as a medical device nor medically assistive device). The UMLEDC can also be used as part of Visible Light Communications Systems (VLC). The UMLEDC last made was $1195 [3 lb]. Since your eyes won't likely detect the LED modulated outputs, you need a specialized device like the ULEDMCD (described above) to detect the outputs of its LED and output intensity. The UMLEDC plus the ULEDMCD last made was $1645 [5 lbs].
The ULTRA ULTRASONIC SHRIEKER: The UUS produces high-level, irritating ultrasound shrieking (adjustable) by manual switch, or randomly. The UUS has these uses:
The UUS is directional, and is enabled for 4 outputs. The UUS is portable, and easy to place/mount and use. 15-50 KHz. See above for special deal in getting an ultrasonic detector with the UUS.Last made $695 [2 lb].
The ULTRA ULTRASONIC COUNTERMEASURE: Outraged over ultrasonics in your environment? Sickened over ultrasonic surveillance and ultrasonic control signals? About once every 4 seconds, the UUC automatically samples to detect ambient ultrasonic signals (if any) for about 1 second, then based on any detected ambient signal, generates and transmits the ultrasonic jamming signal towards the ambient signal's source for about 3 seconds. After which it repeats this process until turned Off. Thereby, the UUC is effective even if the ambient ultrasonic signal is relatively short-lived, and/or it frequency hops and/or changes directions. Tuning is totally automatic - no fussing with tuning controls! In addition, the UUC lights an LED proportional to the detected ultrasonic signal intensity and another proportional to its frequency , making you aware of any ambient ultrasonic signals and optimize your pointing of the UUC for maximum ultrasonic countermeasure effects - critical since ultrasonic signals are highly directional. Input gain is set at an extremely high gain of about 1,000,000 so that even very weak ultrasonic signals can be picked up. Effective ultrasonic bandwidth is from about 15 KHz to about 50 KHz (frequencies above 50 KHz generally attenuate so greatly in air to be effective only for very short ranges). See above for special deal in getting an ultrasonic detector with the UUC.Last made $1795 [2 lb].
The PEMF HELMHOLTZ COIL STIMULATOR
: The PEMFHCS generates the same types of Pulse
Electromagnetic Fields (Pulsed EMFs or PEMFs) as the FDA-approved therapy devices
(such as FDA-approved orthopedic therapy and dental therapy
devices) for the accelerated healing of bone fractures, torn ligaments
and tendons, damaged cartilage and related injuries and the healing of those
which resist normal healing - often called "sports injuries," but
also result from car crashes, slip-and-fall accidents, and for the dental restoration
of jaw bone to better secure the teeth. While Helmholtz coils are most famous
for their many long-established orthopedic therapy and dental therapy uses,
they are also believed to have many other applications, particularly for the
disruption and destruction of electronic implants, hair restoration, scientific
research, communications, metal detection, and detection of metal flaws. (Again,
we are not licensed medical practitioners and we make no medical claims, and
neither this device-type nor any other device we provide is to in any way interfere
with, change or replace a licensed medical procedure, prescription or medical
device.) Every day you are laid up with a serious injury or lose
a tooth is painful, disabling and will easily cost you big bucks in medical
charges, lost quality of life and lost income. Doctors, dentists, clinics, hospitals
and others may charge you $5,000 per therapy to have their PEMF system applied
to you for a limited period - and you don't even get to keep their system!
The PEMFHCS produces a pulse train which consists of a series of major pulse groups of a repetition rate, duration and duty cycle you tune for, where each of these pulse groups consists of a series of pulses of a frequency, duration and duty cycle you also tune for, providing you great versatility for many possible applications. Since Helmholtz coils are non-invasive, they can be applied directly to the skin, or to the clothes or orthopedic cast covering the skin (Note: No electrically conductive contact is made between the PEMFHCS and your body - no electrodes or any invasive hardware is used, and no messy, annoying and costly electrode adhesive or electrode paste is used). Includes the PEMFHCS Module, 3"-diameter Helmholtz coils, and 6"-diameter Helmholtz coils, and of course, User Manual and cabling. Last made $995 [4 lb]. Other size Helmholtz coils can be contracted for with your PEMFHCS CDAF or future CDAF.
The HYPERSENSITIVE SOUND ALARM - Ultrasensitive Sound Detector:
Have you tried to track down these low, fleeting, distant or faint sounds yourself
only frustratingly not being able to hear well enough or react fast enough to
catch them or to determine their sources? Or hired expensive "surveillance
experts," "bug-sweepers" or "ghost busters" with same
zero results or a bunch of BS? The HSA works by using a highly-directional microphone,
super-amplification circuitry, a fast latching circuit (reacts
in milliseconds), both a LED and loud beeping alarms (which
comes with a volume control and can be disconnected for a silent alarm / secret
alarm indication instead) to detect and continuously alert you to
low, fleeting, distant and faint sounds in the mike's pointing direction at
and within the sound band the HSA is tuned for (if you specified
an HSA band).
HSA DETECTS CRITICAL LOW-VOLUME, SHORT DURATION BEEPS FROM OTHER ALARM SYSTEMS: Are you missing sounds from alarms or alerts which are so weak and/or short-duration that you are distracted or sleep through them? Bothered by strange sounds / weird sounds which seem to come at random or odd times, especially while you are asleep? Unfortunately, many critical alarm systems put out a few faint beeps and then shut off - critical beeps you can easily miss because you are soundly asleep, temporarily out of the area or distracted by other noises and activities. The HSA is designed to detect such faint and short-duration sounds and continuously put out a loud alarm until you shut it off, it times out (if you set it for a time duration) or its battery depletes (if you specified battery operation). To remotely monitor the HSA, you can use a baby alarm with it (baby alarm is not included with the HSA unless explicitly contracted for). We believe that for all critical sounds, as many people as possible who consider that sound to be important should be able to monitor it. However, baby alarms are NOT substitutes for the HSA because baby alarms themselves neither detect low-level and short-duration sounds nor do they lock onto any sound. And unlike the HSA, baby alarms are not highly directional (they also pick much unrelated ambient noises such as traffic, neighbors, equipment, animals, etc.). This means that if you try to use a baby alarm to substitute for the HSA, and you are even briefly distracted or step out of the baby alarm receiver area, or you sleep deeply, or the faint short-duration sound is masked by a louder sound picked up by the typical omnidirectional baby monitor mike, you will likely miss the critical low-volume and/or short-duration critical sound. Also, if the source of the sound or the sound itself you are trying to monitor is expected to soon change but the new sound is also expected to be low-volume and/or short-duration, or there are other faint short-duration sounds you are also interested in, know that the very versatile HSA does a great job detecting and alarming to all types of low-volume and short-duration sounds - the HSA has countless low-volume, short-duration sound uses.
THE HSA IS VIRTUALLY IDEAL BUSINESS AND HOME INVASION ALARMS: The HSA, especially the Entire Audio Band (20 Hz - 20 KHz) and the All-Band Audio Plus Ultrasonic (20 Hz - 80 KHz) versions, is a far better preventer of and home alarm system / business alarm system for burglaries and home invasions than traditional home alarm systems / business alarm systems because while traditional business / home alarm systems don't typically activate until the criminal has already damaged or invaded or is in the process of damaging or invading your property, the HSA (with the HSA inside your home or business) can alarm you even if the criminal or feral animal is just milling around the outside of your home, business, or nearby car or other property. As the result, traditional alarms can activate too late to save you, your loved ones or property. The HSA is also great against criminals casing your home or business, snoops, peeping toms, knob-turners, lay-and-wait ambushers, home-invading creeps, vandals, snatch-and-grab thieves, gas thieves, and unwanted door-to-door solicitors - its silent alarm / secret alarm feature can quietly alert you to a current or recent invader or snoop without also alerting the invader or snoop. And as part of a baby monitor, home watch, business watch and nanny watch system. When you or your kids come home to an empty house, is your home really empty? One of the most vulnerable parts of people's homes is their garage - an HSA in your garage can alarm you if someone is trying to break into your garage or has enterred through an open garage door. Basements are also vulnerable to home invaders, burglars, murderers and rapists. We all live in an increasingly dangerous world, increased security is now a must.
HSA DETECTS DISTANT & REMOTE SOUNDS: The HSA is also highly recommended for detecting and listening to remote and distant sounds, and may be a real lifesaver in finding lost children and animals. Also great for bird watchers and other animal researchers, for trackers, for hunters, and for military and police uses. With the HSA, you can detect and hear people and animals at much greater distances and long before they can hear you - giving you great advantages in many situations.
HSA DETECTS FAINT SOUNDS FROM COLLAPSES, CAVE-INS, AVALANCHES, EARTHQUAKES, TSUNAMIS, WAR ZONES, MINING ACCIDENTS, TERRORIST ATTACKS: The HSA can also be highly effective for detecting people trapped in cave-ins and collapsed buildings, bridges, tunnels, mines, ditches, wells, avalanches, landslides, etc., and is highly recommended for people and emergency services in active earthquake zones, mining areas, avalanche areas, tsunami areas, war zones, and likely terrorist target areas. If someone is trapped or buried, you want the HSA to be right on hand to immediately search for them by detecting their movements, shouts, cries and digging in the rubble. You also want to detect hidden broken gas lines, broken water lines and broken steam lines. Highly directional and ultra sensitive, so you don't need to be near or right over the source of the sounds - a big advantage in rubble situations.
HSA DETECTS WATER LEAKS, AIR LEAKS, GAS LEAKS, FUEL LEAKS, CHEMICAL LEAKS: Water leaks can be devastating to your property, not to mention seriously drive up your water bills and waste valuable drinking water. Need to detect water leaks or overflows in your buried plumbing, walls, ceilings and floors, and through soil, concrete slabs, asphalt, wallboard, ceiling tiles, floor tiles, carpets, wood, plastic and other materials? The HSA can be used to non-destructively pinpoint the locations of underground water leaks and ceiling, floor and wall water leaks (water lines, sprinkler systems, faucets and other valves, hydrants, swimming pools and water tanks). Water leaking under pressure usually makes spurting, spraying, gurgling or PSSS-type sounds, such low-intensity buried sounds usually cannot be heard by the naked ear - especially when your ears are 5+ feet off the ground, which the HSA serves as an excellent hydrophone. Air leaks, gas leaks, fuel leaks and chemical leaks can make similar faint but distinctive sounds which the HSA can also detect. Many plumbers and equipment rental places do not have leak pinpointing devices, and plumbers which do virtually never rent them out, and charge you $200 - $300 EACH TIME they use them on your property (some double the price if they find a leak and you do not hire them to make the repairs). If you can't pinpoint your leak in a yard line, building line or valve, you may be forced to replace the entire line at huge expense, not to mention the extra expense of removing the debris from the torn up area, repairing it, and suffering a loss on your property because it now will likely be heavily scarred due to replacing the entire line. However, if the HSA can pinpoint your leak, you can usually restrict your repairs just to that small area at much less cost and damage. For leak detection, contract for The Entire Audio Band Version of the HSA with the Delux Water Leak Detection Mike. The Delux Water Leak Detection Mike is a mike consisting of a long padded cone (to concentrate leak sounds) attached to a three-foot plastic tube handle - an electronic stethoscope. You place the cone on the surface in various places as you walk along the line's route, and listen for distinctive leak sounds, where the sounds are loudest usually indicates exact location of leak. The Delux Water Leak Detection Mike also works great as a long distance surveillance mike, but is not sold for that purpose. In addition, also consider getting the Long-Reach Mike, which is a mike in a five-foot thin plastic tube handle which can reach deep into small spaces and pipes, and which usually much enhances received leak sounds when inserted into a steel pipe driven into the ground near the leak.
Note that another very effective way to detect and locate water leaks is by using the soil conductivity method of our less expensive Ultimo Water Leak Detector & Locator, described on our misc-electronics.htm webpage, and pinpointing water leaks by detecting dips in soil resistance due to the water leak wetting the soil (not effective for air leaks, gas leaks, fuel leaks or chemical leaks, or water not leaking into soil). Since soil and water leak conditions vary widely, and one may work better than the other to detect your water leaks, you ideally should have both the HSA and the UWLD&L on hand to detect water leaks.
Note: Since we neither have control over your soil and leak conditions nor how you will use this device, we cannot guarantee the HSA will pinpoint your leaks, and we assume no liability for false positives, false negatives, locating a leak after damage has already occurred or is imminent, failure to identify the exact location of a leak, or for anything else related to your use of the HSA device or your leak problems. Also, we are not plumbers, so we don't make plumbing repairs or provide plumbing advice or opinions.
HSA HAS MANY OTHER IMPORTANT USES: Hearing sounds or voices in your head or your thoughts being repeated back to you which are not caused by a medical condition and appear to be emanating from external sources you can't seem to pinpoint or seem to be impossible sources of sound? Plagued by sounds no one else can hear or directed towards you alone? Or by weird sounds, voices or other disturbances which emanate from underground, walls, attic, basement, crawl space, garage, shed, bedroom, other room, large appliances, vehicles and/or equipment? Great for car owners and auto mechanics to ferret out those strange vehicle vibrations, squeaks, rattles and buzzes. Or underground streams or other liquid flows? Or as part of a baby monitor or nanny watch system. Or infestations of insects or rodents busily eating or nesting behind your walls, attic, floor, basement or other hidden places? Or as an electronic geophone / seismic activity detector. Or are you into ghost-busting, spirit hunting, space alien hunting, or animal detection or research (e.g. bird watching, hunting, bats, dolphins, whales, burrowing animals, mice, rats, termites, ants, etc.)? The HSA can be used in all of these other applications as well.
HSA FEATURES: The HSA is simple and easy to operate and comes with the HSA Module, the Hypersensitive Mike, the buzzer sounder, quality headphones, AC power adapter (for AC power operation), two new 9VDC alkaline batteries (portable DC operation), cabling, and user manual. The HSA Module comes with a Sensitivity Pot so that you can set the sensitivity (i.e. input gain) from high sensitivity to ultra high sensitivity, a Duration Pot to set the duration of the alarm signal, and an output Alarm Volume Pot to control alarm loudness. In addition to a powerful beeper, the HSA also has a LED which also lights when the alarm is activated, even if you disconnect the beeper for silent indication. The HSA also comes with an output port where you can listen to and/or record the filtered highly-amplified sound (if in the audio band) and/or view the detected signal on an oscilloscope. If you need remote monitoring (e.g. the people doing the monitoring are in a different area or office than the HSA), you can easily use the HSA in conjunction with a wireless baby monitor, home watch / home alarm system, internet monitoring system / internet surveillance system, real time spy camera, or some other applicable legal transmitter/receiver system (the HSA neither includes any of these extra systems, nor interfaces to them, nor any recorder, oscilloscope, spectrum analyzer, etc.).
The HSA has two modalities of operation: (1) Feedback Modality, and (2) Non-Feedback Modality. In the Feedback Modality, the alarm signal is also fed back into the sound detection circuitry, which continuously retriggers the alarm until you shut off power to it. In the Non-Feedback Modality, the alarm signal is not fed back, in which case, the alarm activates for periods primarily set by the Duration Pot.
The highly-directional mike is almost always required to determine actual sound directions - often critically important to determining sound origins with minimal false alarms, and thus determining what or who is making the sounds. By also selecting the band where your sounds of interest lay in, you can also greatly minimize false alarms by isolating your specific sounds of interest - especially useful where and when they are buried in much ambient noise and/or are remote or distant.
If ultrasonics is important to you, we also do ultrasonic HSA device types. Don't be fooled by similar devices which can't perform above 40 KHz. We also offer HSA infrasonic versions (i.e. sounds below 20 Hz), but because infrasound is spread out and infrasound direction is usually not detectable using electronic detectors, the mike provided is built-in and much more omnidirectional.
Note that for all critical uses of the very versatile HSA, be sure to repeatedly test it in non-critical situations as similar as possible to your actual critical use, and then use the HSA as a backup system to any existing system you may have to alert you. Most important are the, (1) Adjustment for input sound amplification (multiturn Sensitivity Pot) to maximize true positive indications while minimizing false indications, (2) Pointing of the directional mike so that you maximize sensitivity in the direction that the sound of interest comes from, and (3) Setting of the output sound level so that you will be reliably alerted while not disturbing others not wanting to be disturbed. As with all of our devices, we are not licensed medical personnel, so we never make medical claims or provide medical advice or medical opinion.
The HSA is the absolute ultimate in low and short-duration sound detection capabilities! Should detecting low and short duration, remote, distant or faint sounds (audio, ultrasonic and/or infrasonic sounds) and alarming you when detected is what you require, the HSA is ideal for you! Last made $395 [2 lb] for the Bass Version (20 - 500 Hz), Midrange Version (500 Hz - 4 KHz) and Treble Version (4 - 20 KHz), $545 [2 lb] for the Ultrasonic Version (20 - 80KHz), $695 [2 lb] for Near Infrasound Band Version (2 - 20 Hz, built-in omnidirectional mike), $895 [2 lb] for Far Infrasound Band Version (0.2 - 2 Hz, built-in omnidirectional mike), $595 [2 lb] for the Entire Audio Band Version (20 Hz - 20 KHz - recommended for maximum versatility and where you are not certain which band the sound mostly lies in or if the sound covers multiple audio bands (i.e. wideband audio sound)), $995 [3 lb] for the All-Band Audio Plus Ultrasonic Version (20 Hz - 80 KHz, with major band-selection switch - recommended for both wideband audio sound and mind control and electronic attacks, ultrasonic communications, and animal detection and research where the animal produces or responds to ultrasonic signals), and $795 [2-3 lb] for any other audio and/or ultrasonic band version you specify (each specified band must be between 1% and 25% of upper frequency in width and be at least 500 Hz wide, and must entirely reside between 20 Hz and 200 KHz; add $95 more for each band you specify above first band; 4 bands max; bands may overlap and you may have gaps between your selected bands). Both the plug-in mikes and plug-in alarm sounders have 4-foot cables (flexible, lightweight, high-quality coaxial cables). While the provided mike is highly directional, we can substitute this mike for a more omnidirectional mike (same cost; covers a much greater area but is not nearly as directional), and we can provide additional mikes (e.g. more omnidirectional mike along with the usual highly-directional mike), $95 [1 lb] per mike extra for all mikes, except the Delux Water Leak Detection Mike, which is $195 extra [3 lb]. While the alarm sounder is rated at 70-80 db, we can substitute it for an even much louder 90-110 db alarm sounder ($45 extra), or provide the 90-110 db alarm sounder as an extra sounder ($75 [1 lb] extra) (as with all alarm sounders, take cautions to not disturb your neighbors and others without their permissions, and place and tune the HSA system to minimize false alarms). Since you can control volume to the alarm sounder, you can also set the volume to either type of alarm sounder to very low if you wish for a much more localized alarming. Should you also need a relay contact output, add $50 for the relay output. Should you need a stop-clock function (freezes a clock display when alarm sounds; clock is included but requires a relay contact output) - great for documenting activations, add $75. As with all of our Customized Devices, we will of course consider any other variations in features and capabilities you specify on your CDAF.
The SOUND SNAP SHOT DEVICE:
Bothered by strange sounds / weird sounds that seem to come at random or odd
times, especially while you are asleep? Hearing sounds or voices in your head
or your thoughts being repeated back to you that are not caused by a medical
condition and appear to be emanating from external sources you can't seem to
pinpoint or seem to be impossible sources of sound? Plagued by sounds no one
else can hear or directed towards you alone? Or by weird sounds or voices that
emanate from walls, attic, basement, crawl space, garage, shed, bedroom, other
room, large appliances and/or vehicles? Concerned about your home security or
business security? Or are you into ghost-busting, spirit hunting, space alien
hunting, or animal detection or research (e.g. bats, dolphins,
whales, burrowing animals, insects, etc.)? Or sounds which come from
the insides of operating equipment to determine exactly how the equipment operates
and problem areas?
To both determine where irritating or mind control or electronic attack sounds are coming from and what is causing them, and to document their actual existence, you almost always need to record them where you can play them back repeatedly to various listeners and even analyze them for those who may be skeptical that such sounds actually exist and are not the figment of your imagination. You have probably already tried to record these sounds but with little luck. You may have even frustratingly tried many audio recorders but with the same failure-to-record results. Or hired expensive "surveillance experts," "bug-sweepers" or "ghost busters" with same zero results or a bunch of BS? The problems with both audio tape and digital recorders (including compact disk recorders) are that their mikes and amplifier stages are relatively narrow band, relatively insensitive, relatively low gain, and often have no AGC, so it is virtually impossible for them to pick up low-intensity, short-duration, audio, ultrasonic and infrasonic sounds. Even the most modern, popular and costly audio tape and digital recorders are not designed to record faint sounds, sound bursts, ultrasounds and infrasounds because they are designed to record only clearly audible voice and music in the audio band. All of the commonly available recorders we tested go no higher than about 22 KHz (mostly 15 - 20 KHz - some less than 8 KHz). The SSSD processes all of these unusual sounds to a format which commonly available modern digital recorders can easily record.
If ultrasonics is important to you, we also do ultrasonic SSSD device types. In our opinion, to do credible ultrasonic research in free air (as opposed to skin-contact medical ultrasonics) requires sensitivity to at least 200 KHz - so don't be fooled by similar devices which can't perform above 40 KHz. Our SSSD is a specially-designed interface unit that plugs into the mike input of a digital recorder. The SSSD picks up the sound through its own handheld mike; the SSSD then amplifies and filters the sound, and then it outputs the much clearer, louder sound to the mike input of the digital recorder connected to it. The SSSD amplifies all detected sounds from 20 Hz to 200+ KHz - deep into the air ultrasonic band - using our best low-distortion, ultra-wide BW, ultra high gain automatic gain control (AGC) sound designs (AGC is invaluable because it results in maximum amplification of faint sounds but automatically adjusts for less amplification of louder sounds - much increasing dynamic range).
With the SSSD device, we also include a new commercial high-memory capacity digital recorder we especially selected for this application after much research. This commercial digital recorder will digitally record continuously for a maximum of 287 - 288 hours, so that you don't miss sound bursts which are often missed by voice-activated / voice-operated (VOR/VOX) recorders. You now can continuously record while asleep, busy or away - even for days at a time. The SSSD comes with mike outputs with good impedance matching to record the amplified raw signal and the demodulated and downconverted signals (if ultrasonic and infrasonic are specified), which you can also use to observe with an oscilloscope. The SSSD also comes with a switch for you to select which major sound band you want to output, and an LED will indicate when there is detected sound in the band of your choice and its amplified intensity. Since not even popular digital recorders will record ultrasonic sounds, the SSSD will first downconvert ultrasonic sounds into the audio range so you can hear an audio frequency rendition of the ultrasonic sounds on a speaker or earphones, which pitch is proportional to ultrasound frequency. And if you specify infrasonic capabilities, the SSSD will also demodulate infrasonics to derive the actual infrasonic signals (e.g. alpha, beta, delta, theta, spindle brainwave frequencies, control frequencies), which you can observe on an oscilloscope. In addition, the SSSD detects and outputs: (1) Audio signals by themselves, (2) Ultrasonic signals by themselves, (3) Infrasonic signals modulating audio carriers, (4) Infrasonic signals modulating ultrasonic carriers, and (5) Audio signals modulating ultrasonic carriers, (2) - (5) are highly characteristic of electronic attack and mind control technologies. If specifed for ultrasonic/infrasonic capabilities, the SSSD will detect and demodulate: FM / PRM / PFM (frequency modulation / pulse rate modulation / pulse frequency modulation), AM (amplitude modulation), and/or PWM (pulse width modulation) (FM and PRM/PFM are our standards, if you need to demodulate AM or PWM, specify in CDAF and additional charges will apply). The SSSD also includes: (1) An input gain pot so that you can control the input sensitivity of the device up to a gain of 100,000+, (2) A directional handheld mike sensitive to frequencies between 20 Hz and about 200 KHz to help detect direction of sound source and therefore possibly its specific location and transmitter (plug-in handheld mike is connected to SSSD through 4' flexible, lightweight coax cable), (3) A selector switch for you to select whether the SSSD output to the tape/compact disk recorder (which you can also connect to an oscilloscope) is normal audio output, or an audio output demodulated from an ultrasonic carrier, and (4) A mixer pot that allows you to tune for the optimum downconversion of ultrasonic signals (if ultrasound capability is specified.)
The SSSD is the absolute ultimate in sound detection, processing and recording capabilities! Should detecting and recording low-intensity sounds, short-duration sounds, modulations, ultrasonic sounds, and/or modulating infrasonic sounds is what you require - full audio, full ultrasonic and full infrasonic capabilities described above - the SSSD is ideal for you. Last made $1995 [3 lb]. The SSSD-Lite is the same as the SSSD except it has no ultrasonic, infrasonic or modulation capabilities - only audio between 20 Hz and 20 KHz. Last made $1195 [2 lb]. Should you also need a relay contact output, add $50 for the relay output. Should you need a stop-clock function (freezes a clock display when alarm sounds; clock is included but requires a relay contact output) - great for documenting activations, add $75. As with all of our Customized Devices, we will of course consider any other variations in features and capabilities you specify on your CDAF. (unless explicitly contracted for on the CDAF to the contrary, all SSSD-type devices include digital recorder and exclude an oscilloscope, speaker and earphones).
The ULTIMO SOLFEGGIO FREQUENCY
HARMONIZER: Our USFH device-type is
a system which accurately produces the six (6) legendary Solfeggio frequencies,
plus four (4) additional freqs some have associated with the Solfeggio Scale.
These 10 Solfeggio Scale freqs were and are claimed to be used in ancient and
haunting Gregorian Chants - which had mesmerizing effects on medieval Catholic
congregations - but actually originating from natural sounds (e.g. ocean, rain,
wind, etc.). The Gregorian Chants literally dug down deep into the very souls
of people to produce euphoria and improved spirits, health, growth, connections
and concentration. Our research strongly indicates that these Solfeggio freqs
are also very good countermeasures against mind control and electronic attacks
by jamming and overcoming negative energies (i.e. harmful sound and electromagnetic
These are the 10 Solfeggio freqs uniquely and accurately produced by the USFH, and their purported benefits:
SL (174 Hz - Love, Security, Warmth).
RES (285 Hz - Restoration, Revitalization, Energy).
SA (333 Hz - Sexual Attraction, Athleticism).
UT (396 Hz - Liberates Guilt, Quells Fears).
RE (417 Hz - Undoing Bad Situations, Facilitating Beneficial Changes).
MI (528 Hz - Transformation, Miracles, DNA Repair).
FA (639 Hz - Connecting, Re-Connecting, Nurturing Relationships).
SOL (741 Hz - Improves Cognitive Powers, Awakening Intuition, Psychic Powers).
LA (825 Hz - Achieving a Spiritual Plane, Spiritualism, Soul Ascendency).
PP (963 Hz - Prophetic Powers, Communicating with God).
Certain frequencies have long been known to have vital positive effects on people's lives and well-being. Other frequencies are dissonant, annoying and even harmful to people. This is why you like music. And why you hate the screeching of chalk on a blackboard. Back in the day, we used to talk about "vibes", saying such as, "she has good vibes", "he gives off bad vibes", etc. "Vibes" clearly is just short for subconscious vibrations, otherwise known as frequencies, tones, oscillations and pulsations. We used to also talk about "clicking", also derived from switching oscillations. Today, we talk about "connections", "soul mates" and "soul works" - again, vibrations play critical parts. Why some natural sounds (such as those integrated into Gregorian Chants), like ocean waves, rain, wind, etc. help us meditate, relax and sleep better. The USHF basically produces purified and enhanced tonal forms of these natural sounds.
Almost all Solfeggio devices these days are silly tuning forks. No one is going to be hitting a tuning fork every minute to produce an audio tone which can be produced automatically and continuously using electronics. And if you want to change the tone, you have to pick up another tuning fork. And if you touch the tuning fork against anything, its sound dies right away. The USFH is extremely versatile because it is designed to produce all of the 10 Solfeggio-related freqs in both sound and electromagnetic energy, and in several waveforms (sinusoidal, triangle wave, square wave, and pulses (tunable from 10% duty cycle to 90% duty cycle) - you select). And it allows you to step through all of the Solfeggio freqs or select any one of them.
MIND CONTROL & ELECTRONIC ATTACK COUNTERMEASURE: The USFH is not only great for meditation, relaxation, sleeping, restoration, and recovery from illness or injury, but it is also great for neutralizing the effects of negative energies by jamming and overcoming them using both sound and EM fields, such as those negative sound and/or EMF signals produced by mind control and electronic attack devices. The big advantages of the USFH over more targeted mind control / electronic attack-type jammers is that you don't have to know what the offending freqs are, where they are coming from, when they are turned On, or when or how often the perp switches freqs. You just turn the USFH On, and keep it on or near you.
The USFH, as with all of our devices, comes with a User Manual. The USFH includes quality headphones, which while designed to be used on the head, can also be placed on other body parts, such as an arm or leg to play the Solfeggio tones through other parts of your body (we can even modify headphones for special applications, such as chest and stomach placements). The USFH also includes electromagnetic coils, which you can place anywhere near or on the surface of your body.
Last made $1495 [3 lb].
Note #1: With two USFH units, you have a truly superb and delux Solfeggio binaural beats system or other dual-tone system by setting one USFH device to play one tone and the other USFH device to play another tone. Binaural beats systems are used in brain entrainment, neurological, psychological, physiological, psychic, therapeutic, learning, creativity, and hearing research. Binaural beats systems is also a countermeasure against mind control and electronic attacks.
Note #2: As with all of our device types, the USFH is a unique Customized Devices project, so we are not limited to the freqs suggested above. You can substitute any or all of these freqs just by specifying in your CDAF your discrete freqs, limited to the 100 - 10,000 Hz range and to no more than 100 discrete frequencies (additional costs may apply).
The ULTIMO ULTRASONIC HETERODYNE
SYSTEM: The UUHS is a system for transmitting
ultrasonic sound modulated by audio sound or infrasound in a highly directional
manner so that almost all of the sound hits a target in a tight beam. The UUHS
is a great device for experimenting with ultrasound communications, mind control
and electronic attack. Both the audio input and the infrasonic input of the
UUHS consist of a microphone and an external connector (compatible
with the earphone output on audio recorders, the recorder is not included).
A mixing pot is also included so that, if you choose to mix signals (signal
mixing is not required, in which case the pot simply acts as an input sensitivity
pot), both the mike input and the external connector input can be
mixed together in any ratio from about 10% to about 90% (great
for subliminal mixing). This mixing result produces the low-frequency
which is mixed with the ultrasonic carrier signal. Outputs simultaneously consist
of: (1) Modulated Ultrasonic, (2) Square Wave Ultrasonic Carrier, and (3) Sinewave
/ Triangular Wave Ultrasonic Carrier. The UUHS also has a 180-degree phase reversal
switch for the Square Wave Ultrasonic Carrier, effectively used for ultrasonic
We offer three variations of the UUHS, based on the number of ultrasonic transmitter transducer assemblies (you can of course provide your own transducer assemblies if you wish which are compatible with the ultrasonic signals):
(1) The Single Transmitter UUHS: The ST-UUHS consists of one ultrasound transmitter transducer assembly. This is all you need to transmit highly-directional modulated ultrasonic sounds in which the audio or infrasonic part of the signal is stripped out of the ultrasonic part over distance in air, sometimes incorrectly referred to as, "air heterodyning." In other words, virtually all of the audio or infrasonic sound energy reaches the target only, as opposed to normal audio sound and infrasound where everyone in the general area of the speaker receives the sound. This works because the attenuation in air of ultrasonic frequencies is much greater than it is for audio and infrasonic frequencies, therefore, as the modulated signal moves through the air, since the ultrasonic component diminishes at a greater rate than the audio and infrasonic components, the modulation component emerges as the major signal, and if audio, can then be heard by someone targeted by the transmitter while others near that person may not hear it at all. The ST-UUHS is also good for doing experiments using ultrasound alone. Last made $695 [2 lb].
(2) The Double Transmitter UUHS: The DT-UUHS consists of two identical and interchangeable ultrasound transmitter transducer assemblies. The typical setup here is to point the modulated ultrasound transducer at a target and the second tranducer connected to one of the ultrasonic carrier outputs pointed at the same target to result in localized targeted heterodyning, which results in both sum and difference frequencies. The difference frequencies mostly consists of the low-frequency modulation part, ideally for making voices appear like they are coming from a targeted surface (hard, sound-reflective surfaces work best). Last made $795 [3 lb].
(3) The Triple Transmitter UUHS: The TT-UUHS consists of three identical and interchangeable ultrasound transmitter transducer assemblies. The TT-UUHS control box has two outputs for each of the three signal outputs described above. This permits you to use any two of the outputs simultaneously, if you wish, with a second output also of your choice, resulting in much greater experimental variations. Usually, when there are three transducer assemblies, they are all pointed at the same target but at different angles, but multi-targeting is also possible. Last made $945 [4 lb].
The ULTIMO TDCS BRAIN STIMULATOR: Transcranial Direct Current Stimulation (TDCS) - "DC brain polarization" - is a painless, non-invasive, low-risk, silent, efficient and relatively inexpensive method of applying small direct currents to the brain cortex through the skull using skin-contact electrodes. The positive electrode boosts, increases or amplifies function of brain region closest to it, while the negative electrode inhibits or suppresses brain function. TDCS has been found to boost cognitive performance and learning and increase IQ, memory and reaction times, as well as to treat several mental disorders. Along with its many important positive uses, TDCS can be used to do mind control, as well as to reverse the effects of mind control, as well as to make the subject more or less susceptible to other forms of mind control. TDCS mind control can be used in conjunction with Transcranial Magnetic Stimulation (TMS) mind control. A mere 30 minutes of secret TDCS stimulation while a person is asleep or unconscious (e.g. knocked out, drugged or undergoing surgery) can result in permanent mind control and behavioral control changes - without the use of electronic implants and with no evidence that TDCS entrainment was ever done. TDCS can be used to produce robotic victims and even Manchurian Candidates. And TDCS is now widely used by the United States Air Force to train pilots in half the usual time. See The Ultimo TDCS Brain Stimulator (Radionics.htm webpage) for details on this popular TDCS device.
The DYNAMIC SUBLIMINAL MIXER/AMP: Subliminal techniques is a widely used method to break bad habits, for automatic learning, for motivation, to keep customers honest, improve sales, enhance psychic/spiritual experiences, and for mind control, brainwashing and other forms of behavioral modification. Unlike ordinary audio mixers (which are used by many subliminal tape/compact disk sellers) the DSMA is designed so that the amplification level of the subliminal message directly and nearly instantaneously depends upon that of the main audio (i.e. Dynamic Tracking). The ratio of the subliminal message to that of the main audio is about constant through the entire volume range of the main audio to maximize subliminal transfer at all audio levels, and to prevent detection during low main audio levels. With ordinary mixers (i.e. subliminal amp does not depend on main audio level), no subliminal amplification really works: It is either so high that you hear the subliminal message during the main audio quiet periods or too low to ever be subconsciously perceived. The DSMA comes with three audio input sections: Main #1, Main #2, Subliminal. Each DSMA input section comes with both recorder "Ear" and Microphone/Auxiliary inputs (Mike Input and Aux Input). And it comes with both a Speaker Out and a Auxiliary Output (Aux Out) for each channel. Out. A toggle switch allows you to select either Main #1 mixed with Subliminal (subliminal mixing), or with Main #2 (normal audio mixing). DSMA frequency response is 20 Hz - 20 KHz. Single Channel ("Hi-Fi") last made $495 [2 lb]. Stereo last made $795 [3 lb]. Each additional independent channel, last made $395 [1 lb]. Multi-channel versions had totally independent single channels (except for power supply and ground). Also, multi-channel versions allowed for the output of one channel to be connected to the input of the other channel(s) for cascaded- or multiple-subliminal real time recordings for advanced users.
ADDED ULTRASONIC & INFRASONIC CAPABILITIES: The Ultrasonic and infrasonic DSMA versions produce various incredibly eerie ghostlike and unworldly emanations! These emanations cannot be consciously "heard" by most humans but can be bounced off walls, etc, or made to seem to have no clear or consistent source at all! ULTRASONIC is especially popular with pet owners and animal trainers who want to mix ultrasonic commands (only heard by the animal) with their verbal commands to possibly train animals to respond in Pavlovian fashion to the secret ultrasonic commands alone to perform in unbelievable ways (e.g. secretly activating or redirecting guard dogs). Great for "proving" that your dog (or other ultrasonic sensitive and trainable animal) can perform intelligent feats, such as counting, etc. INFRASONIC is especially popular with those who study biofeedback and brain entrainment mind control as most brain signals are infrasonic; the brain signals are mixed with normal audio to possibly entrain the brain to automatically obey secret commands in a Pavlovian manner (also known as the "Manchurian Candidate Command System").
ULTRASONIC/INFRASONIC VERSIONS: These are our delux sound experimental units which produce the most incredible and eerie effects of them all! The number of possible weird and strange combos are only limited by your imagination! The applicable sound band is selected with a selector switch. We can add ultrasonic and/or infrasonic capabilties to any combination of inputs you specify. Added ultrasonic or infrasonic capabilities added $295 for the Subliminal input and $275 for each Main #1 and #2 input.
The "SILENT SOUND" SUBLIMINAL MIXER/AMP: Subliminal techniques is a widely used method to break bad habits, for automatic learning, for motivation, to keep customers honest, improve sales, enhance psychic/spiritual experiences, and for mind control, brainwashing and other forms of behavioral modification. Unlike ordinary audio mixers (which are used by many subliminal tape/compact disk sellers) which just mixes two unconverted audio signals together, "Silent Sound" is a sophisticated subliminal mind control technology - popular with the military and large corporations - in which the subliminal input is converted into a special message format (using the rare, expensive and no longer made XR2206 IC so there is a limited number of XR2206 SSSMA which can now be made) which the brain can convert back into intelligent messages without any conscious awareness of the messages. When heard by itself, the converted subliminal message consciously sounds like high frequency noise or gibberish, while the brain subconsciously decodes the signal to retrieve the message. The SSSMA comes with two audio input sections: Main (Aux Input) and Subliminal (Mike Input and Aux Input). And it comes with a Aux Output for each Main Input. The SSSMA Main frequency response is 20 Hz - 14 KHz; SSSMA Subliminal frequency response is 16 KHz - 20 KHz). Single Channel ("Hi-Fi") last made $595 [2 lb]. Stereo last made $995 [3 lb]. Each additional independent channel, last made $445 [1 lb]. For adding the special Dynamic Tracking feature of our famed DYNAMIC SUBLIMINAL MIXER/AMP (DSMA), added $395 for each channel. Multi-channel versions had totally independent single channels (except for power supply and ground). Also, multi-channel versions allowed for the output of one channel to be connected to the input of the other channel(s) for cascaded- or multiple-subliminal real time recordings for advanced users.
ADDED ULTRASONIC & INFRASONIC CAPABILITIES: Note that you can specify the sound bandwidths you want between 0.1 Hz and 250 KHz of either or both the Main and Subliminal inputs. Also note that with any ultrasonic, audio or infrasonic version of the SSSMA, the Subliminal lower frequency must be at least 10% higher than the Main upper frequency (as with the audio version) for Silent Sound to work (however, if you specify, we can also design the Main band to be higher than the Subliminal band). Ultrasonic or infrasonic SSSMA versions produce various incredibly eerie ghostlike and unworldly emanations! These emanations cannot be consciously "heard" by most humans but can be bounced off walls, etc, or made to seem to have no clear or consistent source at all! ULTRASONIC is especially popular with pet owners and animal trainers who want to mix ultrasonic commands (only heard by the animal) with their verbal commands to possibly train animals to respond in Pavlovian fashion to the secret ultrasonic commands alone to perform in unbelievable ways (e.g. secretly activating or redirecting guard dogs). Great for "proving" that your dog (or other ultrasonic sensitive and trainable animal) can perform intelligent feats, such as counting, etc. INFRASONIC is especially popular with those who study biofeedback and brain entrainment mind control as most brain signals are infrasonic; the brain signals are mixed with normal audio to possibly entrain the brain to automatically obey secret commands in a Pavlovian manner (also known as the "Manchurian Candidate Command System").
ULTRASONIC/INFRASONIC COMBO VERSIONS: These are our delux sound experimental units which produce the most incredible and eerie effects of them all! The number of possible weird and strange combos are only limited by your imagination! The applicable sound band is selected with a selector switch. We can add ultrasonic and/or infrasonic capabilties to any combination of inputs you specify. Added ultrasonic or infrasonic capabilities added $325 for the Subliminal input and $295 for each Main input.
The ULTIMO ULTRASONIC COMMUNICATOR & CONTROLLER: The UUC&C is an ultrasonic transmitter type device that permits you to secretly transmit your spoken speech, music, noise, etc modulated by an ultrasonic carrier, powerful and highly directional. Carrier frequency is tunable between 15 - 50 KHz for you to find the most effective frequency(ies) for your needs. Two audio input connectors: (1) Standard microphone input (mike provided), and (2) Standard tape/compact disk / digital recorder input (recorder not provided), which can be used separately or mixed together. Ideal for subliminal mind control, behavior control, behavior modification, power-of-suggestion and automatic learning experimentation; for secret commands, obedience training (e.g. for dogs; feral and dangerous animals; cattle, sheep and other farm animals; zoo animals) and entrainment; and for secret communications (requires a compatible ultrasonic receiver type device, contracted for separately). In some cases, the UUC&C can also be used as an audio disrupter of offensively loud audio equipment used on your property. Five forms of modulation available: Amplitude Modulation (AM), Frequency Modulation (FM), Pulse Width Modulation (PWM), Pulse Rate Modulation (PRM), and Pulse Code Modulation (PCM), each of which has its own advantages and disadvantages. NOTE: Not to be used at athletic events, races or any other event or situation where its use would be illegal, unethical or immoral. Any modulation form (your choice): $995 [2 lb]. Any 2 mod. forms in same box (your choice), switch selectable: Last made $1595 [3 lb]. Any 3 mod, forms: Last made $1995 [4 lb]. Any 4 mod. forms: Last made $2295 [5 lb]. All 5 mod. forms: Last made $2545 [6 lb].
The BRAIN SIGNATURE WAVEFORM DETECTOR: One method believed to be used to track and target individuals for subliminal mind control, behavioral modification, entrainment, electronic attack and electronic harassment (electromagnetic / ultrasonic) purposes is by monitoring their purportedly unique set of brain Alpha (8 Hz - 12 Hz - Awake, mild/moderate stimulation), Beta (15 Hz - 25 Hz - Awake, moderate/excited stimulation), Delta (0.5 Hz - 4 Hz - Stage 3 Sleep, Stage 4 Sleep), Theta (4 Hz - 8 Hz - Stage 1 Sleep and REM Sleep), and Spindles (12 Hz - 15 Hz - Stage 2 Sleep, often with K-Complex) waveforms. The BSWD is a device that lets you experimentally research this phenomenon for yourself. User Manual includes a tutorial on how this technology is purported to work. Includes a RF receiver and the BSWD signal processor, and a high-quality oscilloscope to view your detected waveforms (as well as the many other uses oscilloscopes can be used for). NOTE: This system requires that you have but does not include a cellphone and active cellphone service because your low-frequency brainwaves are extracted from the very slightly modulated cellphone frequencies that pass through your head during normal cellphone calls. Last made $7945 [20 lb].
The ULTIMO SYSTEMIC MOBIUS COIL: The USMC is an induction coil specially and uniquely wound in a mobius pattern. We believe that this particular coil configuration - as opposed to an ordinary (non-mobius) electrical coil - produces unusual beneficial results relevant to jamming mind control and electronic attack signals and therapeutic effects (NOTE: not sold as a medical device or medically-assistive device). Comes with an electronic waveform generator with selections for waveforms, frequencies, duty cycles and intensities. You specify inside mobius coil diamater from 3" to 24" to fit where you want the coil to fit (e.g. head, wrist, arm, foot, calf, leg, hips, waist, chest, etc.). Coil can be compressed into an oval shape if you wish or used in its round shape. Last made $795 + $49 per inch coil diameter (battery-powered only, add $50 for 120VAC powered only, add $150 for both 120VAC and battery powered). Caution: Some believe that some or all ElectroMagnetic Fields are harmful to health, so check with your trusted licensed doctor first to use this or any other EMF device or if you have medical-like manifestations.
The ULTIMO BRAINWAVE ANALYSIS & BIOFEEDBACK / BIOCONTROL DEVICE: The UBA&BBD permits both the extensive analysis of brainwaves and the extensive use of brainwave biofeedback and brainwave control functions. Its brainwave input stage detects and amplifies brain signals. Brainwave amplification gain is tunable (up to about 1,000,000) so that even very faint brainwaves can be accessed. Once amplified, a bank of bandpass filters are then used to break out the Delta (0.5 Hz - 4 Hz - Stage 3 Sleep, Stage 4 Sleep or deep sleep), Theta (4 Hz - 8 Hz - Stage 1 Sleep and REM Sleep), Alpha (8 Hz - 12 Hz - awake, mild/moderate stimulation, relaxed but alert), Spindles (12 Hz - 15 Hz - Stage 2 Sleep, often with K-Complex), Beta (15 Hz - 30 Hz - awake, alert, excited stimulation) rhythms, which actual signal outputs are provided for you to monitor in any combination using a meter, oscilloscope or chart recorder. Each of these outputs is internally connected to a signal accumulator stage, which accumulates each rhythm over periods of seconds and minutes to provide ultimate brain stage and stage transitional data. And because normally you want biofeedback and biocontrol functions controlled by accumulated signal energies so as not to be triggered by spurious or transient values (which may not be indicative of the brain stage) but by the actual stage that the brain is in (e.g. conscious, meditative, REM sleep, deep sleep, etc). An output is also provided for each accumulated signal. In addition, inputs, sensitivity control pots and outputs are provided for control functions, which include normally-open (NO) and normally-closed (NC) relay functions, +9 VDC battery, and 120 VAC (only with devices powered by 120 VAC) control outputs. For the ultimate in brainwave, entrainment, mind control, and behavioral modification research versatility, four jumpers are provided that permit you to jumper between actual signal and/or accumulated signal outputs to NO relay, NC relay, battery and/or VAC biocontrol circuit inputs, with the sensitivity of each biocontrol function controlled by its sensitivity pot. Finally, with the UBA&BBD, you can observe and record individual brainwave signals in any combination of alpha, beta, delta, theta and/or spindles, and you can use any of their actual and/or accumulated signal outputs to control NO relay, NC relay, battery and/or VAC outputs. Last made $1695 [2 lb] (battery-powered only), $1895 (120 VAC-powered only), and $1995 (both battery and 120 VAC powered). Does not include any meter, oscilloscope or chart recorder.
The ULTIMO BINAURAL BEATS EXPERIMENTER:
Binaural beats is an increasingly popular brain entrainment technique, including
mind control and electronic attack scenarios. While the term itself usually
relates to audio signals in the 100 - 1500 Hz bandwidth applied using stereo
headphones, the technique is also applied to electromagnetic and ultrasonic
(both which can be distant and extend to higher frequencies),
flashing light, and electrode stimulation techniques, and its effects can be
simulated using mind-altering drugs. Binaural beats is also used in neurological,
psychological, physiological, psychic, therapeutic, learning, creativity, and
hearing research. With audio binaural beats, a different sound is fed into each
ear. Where the signals meet inside the brain between the two transducers produces
sum and difference frequencies. While the sum frequencies result in audio frequencies
too high to affect brainwaves, the difference frequencies in the 0.5 - 30 Hz
range tend to force the existing brainwave frequencies to synchronize with these
binaural beat frequencies (i.e. Frequency Following Response,
FFR), thereby entraining the brainwaves to the Alpha, Beta, Delta,
Theta, and Spindle frequencies (see above) produced by
the binaural audio generator. If both inputs are pure sinewave tones, then the
resultant beats are also pure sinewave tones. By rapidly and randomly forcing
the victim's brain to jump from one brainwave pattern to another and by subjecting
victim to signals which combine into pulses and not pure tones, binaural beats
clearly can be used to cause some people much pain, confusion, dysfunction,
feelings of going mad, and physical illnesses.
While not everyone is sensitive to binaural beats, those who are sensitive have reported, for examples, induced experiences of extremely restful sleep and relaxation, stress reduction, deep meditation, transcendental states, hypnotic states and hypnogogic states (mind awake, body asleep), altered states of consciousness, out-of-body sensations, enhanced mental telepathy and other psychic powers or loss of psychic powers, memory enhancement or loss of certain memories, mystical and spiritual experiences, holodeck experiences, lucid creative thought and intuition, super learning, hallucinations, remote viewing, confusion, dizziness, frantic and hysterical behavior, paranoia, insanity, involuntary bodily functions, extreme pleasure, pain management and extreme pain. And that these experiences can persist after the binaural beats stimulation stops (like having a tune stuck in your head). And that even plant growth appears to be affected by binaural beats. There is much expert debate as to what does and does not work, and to what extent does binaural beats work. What experience one has with binaural beats clearly depends on one's individual sensitivity to binaural beats and the types and regularity of waveforms, frequencies and frequency differences used. The binaural beats phenomena may explain why virtually everyone much prefers stereo music to high-fidelity music, why people like to dance to music or hum, the differences in music and other sound popularitities, and why some types of music rhythms appeal to some groups of people but irritate other genetically or culturally different groups. Fact is, music itself is a form of mind control.
The UBBE, typical of many of our device types, has powerful and versatile features found nowhere else. The UBBE is designed for serious researchers into binaural beats, music, neurologic, brain entrainment, mind control and electronic attack, as well as therapy, relaxation, learning, hearing and creativity. If you are a skeptic about mind control and electronic attack, we believe that the UBBE will forever end your skepticism - even if you are unconvinced of the equipment, binaural beats tapes/compact disks, binaural beats MP3 files, etc. by others! The UBBE consists of two independent audio frequency generator channels, bandwidth 100 Hz - 1500 Hz, each of which produces a tunable frequency and tunable volume selectable sinewave tone, triangular wave, square wave, and pulse (with tunable pulse width) - all of which can be single frequency, swept frequency or random frequency. Also included is an external input for your own audio for each channel, as well as internal pink noise generator and white nose generator - any combinations of which you can mix in with the waveforms produced by each or both channels for max variability and versatility providing you countless hours of profound and fascinating binaural beats experimentation. And unlike many commercial binaural beats generators which produce the maximum difference frequencies in the middle of the axis between the two binaural transducers, we describe in our UBBE User Manual how to use the UBBE to "focus" the beat frequency location anywhere along the axis between the two binaural transducers to maximally stimulate other parts of the brain.
Output connectors are provided for each channel, and for the mixed output of both channels (which simulates the mixed signal results which may occur in the brain). Also includes a two-digit beat frequency display for the difference frequencies (displays 0-99 Hz beats) - great for beat frequency tunability using sine tone inputs - plus headphones, last made $3495 [3 lb]. Plus addition of phase-shifter that lets you send the same waveform to each channel output except shifted by a tunable phase - great for research into binaural beats phase-shift phenomena, add $995. Plus addition of two new waveforms which when synched together produce PULSE binaural beats of tunable pulse width - clearly much more effective than the SINEWAVE binaural beats that results from two sinewave tone inputs, add $995. Plus addition of extended frequency range - 1500 Hz - 200 KHz (deep into ultrasonic band) - great for ultrasonic attack and mind control research, add $995. Plus addition of plug-in module for electromagnetic / light-flash / electrode outputs, both channels, plus our specially-designed coils and Super Soft-Pinch Electrodes for each channel output (based on our RF policies) - great for added electromagnetic, electrical and flash-light mind control and therapeutic research (since these non-audio transducers are not confined to the ears, other parts of the brain and body can be stimulated, and you can now use one form of stimulation by one channel and another form of stimulation by other channel, for example, to see if light and sound stimulation somehow combine in the brain), add $1295 [+2 lb]. (NOTE: The UBBE is not a toy and is for adult professional researcher use only, is NOT a medical device, and is neither recommended for animals nor for human uses (except in carefully controlled laboratory conditions with the subject giving full permission with full disclosure and knowledge of the possible powerful effects binaural beats of the types generated by the UBBE can produce), and the UBBE must never be used by anyone driving or in any other potentially dangerous situation; and as per our policies, the buyer assumes all risks, and we make no claims as to the type or degree of results or manifestations experienced, if any, using the UBBE) (Does not include any meter, oscilloscope or chart recorder) (Note that headphones are designed to work only in the audio bandwidth).
The NEUROPHONE DEVICE: Incredible, unique and visionary device that converts speech and other complex and highly redundant audio frequency signals into a much more concentrated and compact form that can be transmitted over a much narrower bandwidth, and over greater distances through various materials. The ND is of particular interest to:
The ND comes single-channel. Versatile, fascinating and useful. Modern IC Version, last made $995 [4 lb]. Transistorized (traditional, but using modern transistors) Version, last made $895 [5 lb]. Plans for transistorized version - still available - $195.
The OMNIMAX TENS SYSTEM:
TENS (Transcutaneous Electrical Nerve Stimulator) devices ideally function to
relieve chronic pain and nerve-related disorders (e.g. twitching muscles), to
accelerate the healing processes, to relax nerves, to promote rest and sleep,
as in invigorator, to minimize snoring, for Radionics research, as a general
lab stimulator (e.g. for stimulus and response research and
pain research) - much more! Lesser TENS devices meet only few of
these functions (and even then only on a limited basis).
Don't confuse the OTS with the other $600 - $900 TENS devices (e.g.
Myostim systems), that uses only 1 transistor (no IC) per channel!
You can program and fine-tune the OTS to produce practically limitless variations
of electronic signal outputs to suit YOUR particular needs - the OTS puts virtually
all other TENS devices to shame! Features programmable high-voltage output (25
- 150 Vpp); programmable frequency (20 Hz - 200 KHz); selectable sine, square
wave, pulse (5 - 95% of period) and triangular waveform outputs; programmable
duty cycle (5 - 100%); programmable triangular wave, positive sawtooth wave,
and negative sawtooth wave automatic frequency sweep control or manual frequency
control (you select); and selectable for periodic waveform, burst, white noise
or pink noise output - great for jamming nerve impulses. The OTS is so extremely
versatile and powerful that we ourselves have used these devices for personal
transcranial stimulation (e.g. transcranial direct current
stimulation, transcranial alternating current stimulation, transcranial radio
frequency stimulation, and transcranial magnetic stimulation), personal
transcutaneous stimulation (e.g. personal pain blocking, personal
hair growth stimulation), plant growth, metal deposition / metal
plating, ultrasonic / sonar, high voltage, and pest repellant research, and
to test electronic component specifications (one person suggested
that we make them as penis stimulators - regardless of his "findings,"
we do NOT sell any device as penile stimulators or for any other medical use).
Great as a general electronics laboratory function generator to meet virtually
every signal waveform and type an electronics circuit design or application
calls for. You can then experiment with these numerous possible combinations
of output voltage levels, frequencies, waveforms, durations and duty cycles
to produce results that are optimum for YOU. If there does exist an electronic
combination that will optimally satisfy YOUR needs for a few pennies of electrical
energy, will that not be a great improvement on your quality of life over whatever
current methods you are using to try to obtain similar results, if indeed you
are using another method to try to obtain similar results? 1-Channel: Last made $1695
[2 lb]. 2-Channel (2 independent channels, same case &
power supply): Last made $2995 [3 lb].
The ULTRA OMNIMAX SYSTEM is a full blown OMNIMAX SYSTEM-type device as stated above, but which also includes an audio bandwidth input with several forms of pulse modulation of it to produce modulated pulse outputs for mind control research, PLUS outputs for small high-inductance magnetic coil electrodes (including the small magnetic coil electrodes) which can be used for Transcranial Magnetic Stimulation research (TMS), with the User Manual containing detailed information on both the mind control research and TMS research-type features of this truly mind-boggling device-type. 1-Channel: Last made $2395 [3 lb]. 2-Channel (2 independent channels, same case & power supply): Last made $4495 [5 lb].
The UNKNOWN & UNSEEN ENTITY DETECTOR: A device type sometimes referred to by others as unknown presence detectors, unseen presence detectors, spirit detectors, ghost detectors, ghost busters, alien detectors, and alien buster detectors. Yet another one of our all time most exciting and incredible devices! Concerned about nearby hidden people (e.g. rapists, muggers, home invaders, stalkers, peeping-toms) or animals, or spirits or ghosts which can disturb the ambient static electric field and/or the electromagnetic field? Detect them with the U&UED! The U&UED is an ultra-sensitive device which will detect the presence or nearness of virtually anything which produces or disturbs this omnipresent Static Field (U&UED1) or Electromagnetic Field (U&UED2) (the U&UED-Combo is both a U&UED1 and U&UED2 combined in the same box using the same power supply). Static field and electromagnetic field disturbances are not normally detectable with the human senses alone (some animals are very sensitive to these electric field disturbances). Worried that someone is hiding in your home, business or vehicle? Or some feral animal is laying in wait to surprise and attack you? The U&UED may help to detect and warn you! With Sensitivity Adjustment to boost dynamic range. (NOTE #1: We do NOT claim that ghosts and spirits actually exist; our designs are based on our proprietary theories should they exist. NOTE #2: Works best under dry conditions, the environment should be less than 50% Relative Humidity because high humidity adversely affects disturbances in electrostatic fields; and avoid using the U&UED near large metal surfaces, large bodies of water and AC power and radio emitters and other manmade strong electrical disturbances as proximity to these entities may cause this device type to not properly function). The U&UEDs are the same types of devices used by paranormal researchers, UFO and alien researchers, and "ghost busters." Last made $695 [2 lb] each, $1285 combined (U&UED-Combo).
The AUTOMATIC WRITING MACHINE: Some people appear to be very sensitive to signals coming from God, angels, space aliens, ancient ancestors, departed spirits and even animals, which sensitivity manifests itself into automatic writing. However, most people lack this inate sensitivity, but would still like to engage in automatic writing based on incoming signals. Basically, how the AWM works is that you hold it in the palm of your hand and a pen or pencil in the fingers of same hand prepared for writing. You lay down a blank sheet of paper. You turn ON the AWM. You then attempt to draw freehand an horizontal straight line across the paper about at your normal writing speed. The AWM picks up signals from the air using its wideband antenna, highly amplifies them, and then transforms them into mechanical vibrations. These vibrations then cause your pen or pencil to vibrate in the vertical axis to modulate your attempted straight line into what now appears to be writing. Practice and experimentation are required for best results. Also may help to reveal mind control and surveillance attempts against you. Also makes a really fun game, and a great science project. Last made $685 [2 lb]. $100 added for highly directional antenna.
The ULTIMO NOISE COMMUNICATOR SYSTEM: Used to be that control signals, voice and data could only be communicated using clear signals. Not any more! The UNCS is a system, consisting of both an ultrasonic transmitter and ultrasonic receiver, used to demonstrate that noise can be used to communicate intelligent signals. Electronic, electrical, audio, ultrasonic and infrasonic noise can be intentionally used to produce a control signal, voice signal or data signal itself. Our research shows that noise - virtually regardless of what mode it is transmitted in and what band it occupies within that mode (but almost always high band) - can itself be used to transmit information! Noise communications is in fact a state-of-the-art method of secret communications. Noise is a particularly effective means of further stealthing mind control and electronic attacks as well as communications because even if a victim is able to correlate noise bursts with his/her manifestations, authorities can easily write off his/her allegations, such as, 'It's just a bunch of radio static that just happened to correlate with X's manifestations - everyone knows that noise can't control anything or transmit data.' Sometimes the intelligent information in the noise will give it a quality where it will sound voice-like (quasi-voice) or data-like - you may even be able to discern what the voice is actually saying if you listen very carefully - and it can also be subliminal (e.g. using ultrasound noise to conceal audio signals). In other cases, it will just sound like noise bursts, and often totally overlooked as a possible source of voice, data or control signal, or go undetected by normal senses because both the noise and signal are ultrasonic. Last made $9985 [4 lb].
SCANNERS - The DEVICE! (NA): Ever want to forcibly, yet secretly, project YOUR THOUGHTS into other people and/or animals as an overpowering EM signal? After years of secret experimentation, John Williams developed Scanners - The Device! The ultra-high gain, ultra-low noise and distortion brainwave (and other biologic signal) amplifier coupled to a powerful and effective, yet highly directional, EM transmitter is an absolute must for all serious students and practitioners of Psychic or Mind Control Lab, Weaponry and Countermeasure applications. Range is about 50 feet. Can be attached to a helmet or hat or on/inside clothes, carried in the hand, or concealed inside or behind any nonmetallic object less than about 6" thick. The SD is so controversial, we simply can no longer make it for the general public! Last made $1299 [2 lb]. HISTORICAL DIAGRAMs only: $1,000.00.
The ULTIMATE WEAPONS & LAB DEVELOPMENT SYSTEM (NA): The UW&LDS is a very powerful, effective, highly directional and totally quiet system used in theoretical and applied research into EM weaponry and psychological and physiological manifestations (e.g. behavioral modification and mind control). The UW&LDS uses programmable modulated GHz waveforms. Hand-held and portable. Range exceeds 1 KM. User manual includes operation details, insights and tips. The UW&LDS is a complete EM weapons/lab device experimental development system. Last made $3455 [12 lb]. CAUTION: The UW&LDS is one bad device! It can produce boresight waveforms that are extremely dangerous - and again, buyer assumes all liability for its use and abuse! As with all of our devices, do NOT use in any illegal, unethical or immoral way whatsoever!
The SUPER SLEUTH ULTRA HIGH GAIN SOUND AMPLIFIER & DETECTOR: The SSUHGSAD is an ultrasensitive sound amplifier, detector and pinpointer that operates in the audio range (20 Hz - 20 KHz). Gain is up to about 1,000,000. Comes with 3 tunable bands - bass, midrange and treble - you can independently tune to amplify or attenuate these frequency bands to bring out certain sounds and/or repress others that might be masking them. This device is great for picking up the faintest sounds - even when masked by other sounds. Can be built into a stethoscope or wand configuration if you specify it. While great for general sound amplification, it is especially useful for detecting, pinpointing and recording (tape/compact disk / digital recorder is not included) special sounds that you cannot ordinarily hear well enough or pinpoint, such as biological sounds (e.g. wildlife (e.g. birds, herd animals, predators, fish, game), hidden / buried animals / insects / crawling insects (e.g. termites, ants, prairie dogs, moles)), biomedical sounds (e.g. heartbeat, pulse, digestion, breathing), mechanical sounds (e.g. engine noises, weird home and vehicle noises), water leaks, flooding, burning sounds, cooking sounds), natural sounds (e.g. wind sounds, ocean sounds, storms, thunder, tornadoes, hurricanes, floods, earthquakes, tsunamis), distant sounds (e.g. someone coming up your driveway, the mailman, the delivery, cable, phone, utility or repair guy, someone talking or yelling at a distance), unseen dangers (e.g. wild animals, feral animals, burglars, peeping toms, stalkers, muggers, creeps, eavesdroppers), and for ghostbusting and ferreting out other hidden earthly and alien beings. The ultra-sensitive audio pickup of this device is mounted on a 6' pole - easy to point at suspected areas including bushes, trees, attics, crawl spaces, holes, underneath beds, underneath vehicles, darkened rooms, ground, underneath storm debris and other items, roof, nooks and crannies. Highly directional. Portable and battery-operated. Tunable sensitivity. For SSUHGSAD-type with 3 tunable bands, last made $695 [3 lb]. For SSUHGSAD-type with 6 tunable bands for ultra sound isolation and pinpointing, last made $895 [3 lb]. If you want two sections of these to form an electronically matched stereoscopic-type device with much increased sound direction pinpointing ability and sensitivity - sort of "bionic ears" - for 3 tunable bands, last made $1295 [3 lb], for 6 tunable bands, last made $1695 [5 lb].
The "TAOS HUM" INFRASONIC & BRAINWAVE DETECTOR & AMPLIFIER: The THIBDA is designed to be both an Infrasonic Detector / Infrasonic Amplifier and a Brainwave Detector / Brainwave Amplifier. Many today are maddenly afflicted by persistent distant humming sounds. These generally very low frequency hums mostly sound like a distant diesel engine idling, approaching train, jet, bus, pump or electric motor. Some detect these infrasonic hums (subsonic hums) as physical vibrations felt by their bodies or heads (usually not actually heard), often through the Earth or large objects as infrasonic vibrations. Infrasonic sensitivity varies - some can hear/feel infrasounds while others around them can't. Low frequency hum can travel hundreds of miles with little attenuation in air and water. Among other things, onset or increase of ambient infrasound is believed to be precursors to impending earthquakes, volcanic activity, tsunamis, tunnel-cave ins / mine cave-ins, building collapses, dam collapses, snow avalanches, mud slides, etc., and some say also as a general predictor of foreboding and ominous events and as an unknown presence detector in which the disaster can occur even within seconds or minutes of new or changed infrasound. Some people are driven virtually mad because of persistent infrasonic hums day and night (infrasonic humming sounds can be caused by both external and internal factors, such as high blood pressure and toxic heavy metals; there are 100s of toxic waste dumps in northern New Mexico - some near Taos; always see your physician to eliminate or treat medical causes; we provide no medical advice/opinion/claim). Some infrasonic hum comes from unknown sources - some say from the Earth's core or from outer space. Extensive efforts have been made to detect hum. Problem is that most hum sleuths use sound amplifiers and recorders not optimized for infrasonic detection, and few make any attempt to detect vibrational hum - or even use optimum transducers. Subwoofer amplifiers usually bottom out at about 40 Hz, so are useless for infrasounds. However, the THIBDA is specifically designed to receive and amplify sounds and vibrations in the 10 Hz - 60 Hz bandwidth (we can do infrasonic frequencies below 10 Hz, down to about 0.1 Hz, at additional cost). The THIBDA has two selections: 10 Hz - 55 Hz (non-AC power hum), and 59 Hz - 61 Hz (AC power hum). Amplifier gain is tunable from 5,000 to 500,000. Includes automatic gain control (AGC) to extra-boost very faint sounds over louder more obvious ones. Also includes electrode inputs for monitoring and reproducing brainwaves. Amplified frequencies below 50 Hz are then boosted up into the audio band for you to hear them and be alerted to their presence. Also includes visual display. Helps you detect and locate external bass and infrasound hum sources, both sound and vibration. Last made $2995 [3 lb].
The LONG-RANGE INFRARED DETECTOR : Detect the presence of things that generate heat without having to see or hear them first! The LRITD is an ultra-sensitive infrared (IR) detector that will alert you to heat sources up to about 200 feet away. The LRITD includes LED beeper indicators as well as switched 9 VDC and relay closure outputs (e.g. for burglar alarm uses). The LRITD can also be used to detect when a heat source leaves an area (e.g. to monitor a child or pet). And to verify when equipment is turned or left ON or OFF because most operating equipment generate some heat. Can sometimes be used to verify which rooms and areas are occupied by people or animals when they are not visible to you. And helps you detect the presence of hidden operating equipment, such as surveillance devices. And helps you detect the loss of heat from your home, business, or buried/concealed hot water lines and hot water line leaks to help save heating costs. Uses a unique, rugged, and highly effective method of concentrating heat in its detector unit for much greater sensitivity. Particularly sensitive to the 7-14nm IR range of human and (most) animal body heat. Last made $495 [2 lb].
Introduction to this Page
Customized Devices Application Form (CDAF) Webpage
The ULTRASONIC GALVANIC SKIN RESPONSE CORRELATOR:
We believe that the Galvanic Skin Response (GSR) is a good indication
of anomalies that reside beneath the skin where the galvanic skin response
is taken from, and that galvanic skin responses will be very close to each
other when the taken on two corresponding positions on symmetrical parts of
the body of a healthy person. In other words, for example, if there is an
anomaly located unseen under the skin of the right foot but not under the
left foot skin in the same foot area, galvanic measurements will likely be
different for both foot areas (same part of foot; amount of
galvanic skin response difference largely depends on type, size, position
and depth of anomaly; both areas should have same amount of skin wetness)
because the two feet are fairly symmetrical to each other; however, if there
is no anomaly in either foot, then the galvanic measurements, while usually
not identical, should be close to each other. We define an "anomaly"
(e.g. tumors, infections, impaired blood flows, nerve disorders,
strained/torn muscles, strained/torn ligaments, strained/torn tendons, cracked/broken
bones, lesions, subcutaneous electronic implants, etc.).
The UGSRC includes two of our proprietary Super Soft-Pinch Electrodes. When attached to the skin, the input is fed into an ultra high input impedance ultra high gain amplifier (with AGC and adjustable gain to about 1,000,000), with the results displayed on meter (included). AGC - Automatic Gain Control - is important because it much extends the dynamic range of the amplifier, allowing for full amplification of very weak signals but little amplification of very strong signals.
What makes the UGSRC especially important and totally unique is that it includes an ultrasonic pulser - a special ultrasonic output transducer. The purpose of the ultrasonic transducer is to "thump" or "ping" tissues and organs (i.e. stimulate tissues and organs) located under the skin with ultrasonic pulses (adjustable pulse rate), which pulses are believed to cause an electrical reaction by some anomalies. This reaction may result in a much heightened or amplified galvanic skin response, if so, causing a much greater difference in the galvanic skin response between the side with the anomaly and the side without the anomaly. And furthermore, this reaction may also result in a much much heightened or amplified galvanic skin response from the same electrode placement over an anomaly between the ultrasonic transducer being ON and being OFF, thereby making the UGSRC very useful in electrically ferreting out and pinpointing those well-hidden anomalies, and also for unilaterally testing non-symmetrical parts of the body as well. The ultrasonic transducer is usually placed between the two galvanic electrodes.
Galvanic skin responses (GSRs) are also traditionally used to detect and expose lying (e.g. polygraphs / lie detectors), psychology research (e.g. reactions to stress and to disturbing thoughts and memories), biomedical research, biofeedback research, paranormal research / psychic research, mind control and electronic attack, and for "ghostbusting." GSRs are ever popularly used by a large religion to ferret out and compensate for stresses in people's lives. We also believe that the UGSRC can be used to test and/or stimulate animals and plants as well. The UGSRC is great for those into researching their own bodies, gadgeteers, experimenters, science researchers / science projects and Science Fairs. Practically endless uses. UGSRC last made $1995 [2 lb].
(NOTE: We are not licensed medical professionals, so neither can we make any medical claims nor can we provide medical opinion or medical advice; should you believe that you have an anomaly under your skin, promptly contact your own doctor (at your own expense); since this is a newer technology, we do not have tables that correlate galvanic skin responses to specific anomalies so we have no diagnostic information relating to any particular galvanic skin response for anomalies that may result from any medical condition so the UGSRC is NOT intended to be a diagnostic tool - see your doctor; since the UGSRC can only detect those anomalies that cause differences or changes in the galvanic skin response, it cannot detect anomalies, if any, which do not produce galvanic skin response differences or changes; the lack of a significant difference or change in galvanic skin response does not mean that there is no anomaly; external electromagnetic fields and electronic beams (e.g. from a direct energy electronic attack) which impact one side of the body more than the other can result in different galvanic skin responses in absence of any anomaly and thus the UGSRC may also be a useful tool in detecting exposures to ambient EM fields; and differences in galvanic skin responses can result from no known, understood or provable internal or external causations).
The ULTIMO "MONTAUK CHAIR":
The infamous Montauk Chair is reputed to be based on the the design of a special
chair which was used by space aliens to perform mind control. The original Montauk
Chair was reputedly copied from a chair recovered from a UFO crash site - a
UFO believed to have been used to perform alien abductions. The Ultimo "Montauk
Chair" (UMC) comes with an headrest and an antenna array, which is adjusted
to be poised just above the head and is shaped similar to a half-unfolded umbrella
or Asian conical hat (i.e. "coolie hat"). The
mind control / body control electronics are stowed in a shelf underneath The
Ultimo "Montauk Chair". We cannot include any mind control / body
control electronics (as policy, we can only provide mind control
and electronic attack detection devices and countermeasures) with The
Ultimo "Montauk Chair," but it does include its mind control electronic
function diagrams (no mind control circuit diagrams),
and its transducers (e.g. embedded coils, antennas, sounders,
etc.), including their technical specs and all of their cabling and
connectors, so that one can design and implement his/her own system. The Ultimo
"Montauk Chair" is not limited to mind control and body control but
can also be used for relaxation therapy, pleasure therapy, meditation, learning
therapy, dream creativity, dream research, sleep research, radionics research,
biofeedback research, entertainment, seances, etc., any or all of which we can
include as part of your unique CD project at extra costs. In fact, our Ultimo
"Montauk Chair" is ideal for our Transcranial Direct Current Stimulation
(TDCS) device-types (ULTIMO TDCS BRAIN STIMULATOR (UTDCSBS)) and
the Transcranial Magnetic Stimulation (TMS) device-types we also do as CD projects
(see our radionics.htm webpage for the UTDCSBS description).
As part of the Client's CDAF application, the Client specifies the chair which we buy and convert into our Ultimo "Montauk Chair", because people vary in size and shape, as well as preferences for style, material and color. There are a few restrictions: (1) The chair must either have a sturdy headrest or the back of the chair must be strong enough for us to install a sturdy headrest. (2) The chair must have some area, preferably underneath, where a shelf of at least 1/2 cubic feet can be built to stow electronics (no dimension less than 4"). (3) The chair must be padded (some padding will be opened up by us and then resealed for placement of transducers, including coils, antennas and sounders). (4) The chair must have a minimum of metal in it near or above seat level as metal may interfere with its operation. (5) The chair must not weigh more than 60 lb. The Client selects a chair of his/her preference, and then emails us the make, model, dimensions, and type and color of chair materials. If we cannot find that chair make and model in our area, we will then try to find a chair most close to the Client's specified dimensions, type and color. Last made $6985 [Weight and thus Shipping costs vary depending on Client's size and chair preferences, and shipping address] (for a new chair with a built-in headrest not exceeding $200 in chair's base price).
The 6TH SENSE COMMUNICATOR: One popular product. The SSC consists of a bio-transceiver, which has electrodes (attached with an elastic band or tape). The electrodes may be attached to the heads of the source and receiver, to the head of one and the body of the other, or to each of their bodies, depending upon use. Examples: For bio-commo, the electrodes are attached to the head. For healing, one device's electrodes are attached to the head (or body) of the healer (source), while the other is attached to the relevant part of the body of the subject (receiver). What the SSC does is to highly amplify signals produced by the head/body of the source and transmit them to the head/body of the receiver. Thus, the receiver can actually experience the electrical activity generated by the source's brain. More than one SSC can be used at the same time to involve more than one source and/or receiver. And the source and receiver can be the same person or animal. Sure to give you endless hours of experimentation, exploration, learning, fascination, pleasure and amusement. Last made $395 [2 lb]. For two units (required for full-duplex operation), last made $695 [3 lb]. Last made $275 [1 lb] for each additional unit.
The TELEPATHIC AMPLIFIER : Some people are reputed to possess awesome telepathic powers (we do not claim that telepathic powers exist, or if they do exist, in what form, to what extent, who has them, or how used). "Telepathy" is a highly-specialized form of nonverbal and non-sensory communication believed used in some forms of subliminal mind control, mind-reading, remote viewing, secret communications, brainwashing, brainwave entrainment, behavioral modification, electronic attacks, and alien attacks. After much research, we now believe that we have pinned down the exact mechanism behind mental telepathy powers. For those who do not now possess adequate telepathic powers to effectively and reliably use them, and for those who have established telepathic powers and wish to increase range, the TA is a must! Note that our telepathic powers theory is strictly proprietary and a trade secret, and the result of many costly hours devoted to this research; however, we are also willing to seriously consider any Telepathic Amplifier device-types based on customer theory(ies). Last made $695 [3 lb], based on our theory.
The ALIEN BUSTER BLASTER : Sometimes referred to by others as a space alien jammer,
space alien buster jammer or space alien blaster. Some know or believe that
space aliens (ETs or extraterrestrials) exist,
possess advanced mental telepathic powers, and secretly communicate, eavesdrop,
control, harass and attack mental telepathically. How can one escape capture
if the abductor knows and controls one's every move and thought? Often, UFO
abductees believe that they can't escape alien abduction since their space alien
captors know or can predict their every move by telepathically reading their
minds and controlling their actions, and telepathically communicating this info
to their "gang" members for electronic gang stalking. At least until
now! Based on our proprietary telepathic research, the ABB jams and disrupts
space alien telepathic communications as how we believe they occur (if
they do occur). If so, creating a Telepathic-Free Environment for
its believed victims protects them from telepathic mind reading, telepathic
mind control, telepathic harassment, telepathic attacks, telepathic interference,
and telepathic surveillance / telepathic tracking / telepathic location-finding
by space aliens should the source of the attacks be telepathic and of space
alien origin. Note that our space alien telepathic theory is strictly proprietary
and a trade secret, and the result of many hours of space alien and mental telepathy
research (and not provable because to prove space alien telepathic
attacks using double-blind scientific studies requires recruiting provable space
aliens to attack uninformed victims in scientific laboratory settings witnessed
by Government scientists - all of which are not reasonably possible or likely
legal to even attempt - the very reason why most victims of claimed space alien
attacks cannot prove their attacks to others and must act on their own to protect
themselves, and why we never make any claims about the existence of space aliens,
space alien actions or intentions, or mental telepathy or any other paranormal
phenomenon). We are also willing to seriously consider any Alien Buster
Blaster device-types based on Client theory(ies) of space alien mental telepathy,
if it can be reasonably implemented using electronics. Last made $595 [2 lb],
based on our theory.
NOTE: While we ourselves believe that space aliens exist, are walking the Earth right now, and are stalking and electronically attacking (or possessing or controlling) people, we do NOT claim that space aliens exist (or ghosts or spirits), or space aliens are walking the Earth, and if so, are stalking and electronically attacking people, because it is difficult to prove that someone is being electronically mind controlled or attacked and much more difficult to prove whether or not the attackers are humans or space aliens as their mind control signals could be very similar.
The SUPER SOFT-PINCH ELECTRODES (Pair): The SSPE electrodes are a very special non-invasive external electrode pair (non-invasive electrodes) which gently, yet securely, pinches onto fingers, toes, ears, nose, loose skin, plant parts, rough and uneven surfaces, etc., and do not require any skin penetration, gel, saline solution, pad, tape or elastic band to work. The Soft-Pinch Electrodes are very versatile spring-operated and bifurcated on both sides (2-tine fork-like). Because these electrodes are bifurcated, other electrodes can be connected to them in series or even groups if you wish using screws. Can be used as experimental and monitoring radionic electrodes, biomedical electrodes (bio electrodes), biofeedback electrodes (BF electrodes), paranormal electrodes, electronic attack electrodes, and mind control electrodes. Can be used on people, animals, plants, and even inert objects. Not intended as medical electrodes. Can be used as stimulating electrodes or recording electrodes - even for some high-voltage uses (used by us for voltages upto 250V, but always carefully test first). Not only are these electrodes very gentle and hold on well, but they can be quickly connected, disconnected and moved around on the surface being used on. SSPE electrodes have very supple and flexible 1/8" dia. leads, yet lasts for 10+ years under normal use and are highly insulative and water and oil resistant. The SSPE comes in any length you specify, 2' - 60' foot range (combined lengths of both SSPE electrodes), and each SSPE electrode can be of the same or different lengths and/or use the same or different end connectors as you specify (because these are Soft-Pinch Electrodes, we recommend 1-2 feet extra for slack). Last made $12.95 for 2' [1 lb], +$4.95 for each additional combined-length foot you require (specify length of each lead, and your end connector(s) - BNC, banana plugs, pin plugs, spade lugs, "eye" lugs, alligator clips, etc., lugs and 3' lead lengths (6' total) are assumed if you don't specify). For an image of Soft-Pinch Electrodes and more details, see ABQ-Techzonics Test Equipment webpage, then search for this Item there (search for "SSPE"), then return here to Lone Star Consulting, Inc. to obtain all you need (Note: As policy, we never recommend for or against another company, product or service).
The VERY FLAT & THIN SPIRAL ANTENNAS: Unique and difficult to make/find thin, flat spiral antenna with many applications, including with three devices described above. We can do just about any flat, thin spiral antenna from dime-size to about 12" diameter size in any gauge of wire from 30-gauge to 10-gauge (26-gauge most common, the thicker the gauge the thicker the completed antenna), single-layer and multi-layer (mutlilayer has greater inductance but is also thicker), and copper or nichrome. Great not only for optimum antenna placement through thin slots, cracks, slits, orifices, openings and spaces in electronic equipment chassis and between PC boards for electronic diagnostic, electronic troubleshooting and electronic control purposes but also for medical, biomedical (e.g. miniature Helmholtz coils, brainwave coils), biofeedback, remote control, electronic implants, magnetic field generation coils (e.g. telecoils/magnetic induction loop systems), small metal detector coils, magnetometer coils, communications antennas, surveillance antennas (e.g. direction-finding antennas; and 'through-wall' type applications where the transmitter coil is on one side of a wall and the receiver coil is opposite on the other side), near-field TSCM monitoring, EM shields, works of art, jewelry, crafts, wall mountings, work mats, heating mats, coasters, conversational pieces, etc. We can also cover, coat, and/or mount the antenna using many different materials and fixtures. Last made $29 [1-2 lb] for a spiral antenna about the width and thickness of a credit card, about 400 microhenry.
Introduction to this Page
Customized Devices Application Form (CDAF) Webpage
Like what we offer and have a website? Then please put free hotlink to our home page => Lonestarconsultinginc.com
This webpage is filled with mind control information and electronic attack information relevant to mind control tactics, electronic attack tactics, mind control strategies, electronic attack strategies, mind control techniques, electronic attack techniques, mind control weapons, electronic attack weapons, mind control countermeasures, electronic attack countermeasures, and mind control detectors and electronic attack detectors.
Introduction to this Page
Customized Devices Application Form (CDAF) Webpage
Introduction to this Page
IMAGE SPONSORED BY: |
Lone Star Consulting, Inc.
REPRINT POW-MIA IMAGE=>
ON YOUR WEBSITE
NOTE 1: We make no medical, legal, scientific, engineering, supernatural or paranormal claims including but not limited to claims about the existence, extent, intentions, purposes and capabilities of space aliens, ghosts, spirits, psychic powers, psionics, mental telepathy, precognition, auras, clairvoyance, remote viewing and pschokinesis - all related CD projects we do are based on our proprietary theories SHOULD they actually exist AND if the customer does not clearly specify in his/her CDAF another theory he/she wants the CD device design to be based upon.
NOTE 2: By policy, we never recommend for or against, approve or disapprove, sponsor, endorse,
support, guarantee, or take any responsibility for any of the content of any
non-Lone Star Consulting, Inc. webpage, website, advertisement, publication
or other statement EVEN IF WE HAVE PROVIDED A HOTLINK TO IT. And by policy,
we never recommend for or against, approve or disapprove, sponsor, endorse,
support, guarantee, or take any responsibility for any non-Lone Star Consulting,
Inc. company, product or service EVEN IF WE HAVE PROVIDED A HOTLINK TO IT. For
more information on our policies, please refer to our policies.htm
Webmaster's Test Links only - not for visitor use: Source-A Source-D Source-E Source-F Source-G Source-H Source-I Source-J Source-K Source-L Source-M Source-N Source-P Source-Q Source-R