of EL PASO, TEXAS
Customized Devices Application Form (CDAF)
All Customized Device (CD) Types (framed page) - All CD Types (unframed page)
Mind Control, Electronic Attack, Unusual, Strange CD Types (this webpage)
These 2019 Catalog Webpages Now on 1G Flash Drive (only $19.95)
Lone Star Consulting, Inc.: (See Our CDAF Page or Sitemap Page for Address)
VOICE (9-5 MST): [915 - 474 - 0334]
Check, Money Order, Money Transfer Service (MTS), Trade
sitemap - policies
Site - No cookies - No adware - No spyware - No trojans - No viruses -
No worms - No spam - No popups
We Respect Your Privacy - We do NOT Monitor nor Track Your Activities Online, nor Share Your Data
Hi-Tech Telephones, Cellphones, Faxes, Answering Machines, Voice Mail, Phone Bugs, Phone Taps, Modems, Pagers / Beepers, Zons Customized Device Types
Custom-Made Telephones, Cellphones, Faxes, Answering Machines, Voice Mail, Pagers, Beepers, Modems, Zons & Phone Bugs Products and Services
Unique, Original, Made-to-Order, Special Needs, Unusual, Strange, Weird Customized Device Types We Can Do For YOU! Backed by 25+ years of Professional Design Experience!
... and tell your friends!
Hello! We support many technologies. For introduction into how to obtain hardware and our design philosophy, please go to our Home Page: Home. Hotlinks to all of our Device Types: Devices. Hotlinks to all of our high-tech Topics, Titles: Site Map. When you are done, please use your Browser's Back Button to return here.
Pinpoint Hotlinks to All Listed Device
Types (on devices.htm page)
If you can't find the Topic or Title you are looking for below
by scrolling or using your Browser's Find/Search function, our ==>
sitemap.htm page has comprehensive hotlinks to all of our Topics, Titles
ADD A NEW ELECTRONIC FREQUENCY COUNTER TO YOUR CUSTOMIZED DEVICES: Many of the Device-Types described herein automatically come with displays. These displays may consist of meter-type digital readouts, analog readouts or LEDs. Now you can add a new small and portable Electronic Frequency Counter (EFC) to any Customized Devices (CD) device you contract for with us (includes, but not limited to the Device-Types described herein) which processes or produces a sinewave, square wave or triangular wave between 0.009 Hz and 99,999 Hz. Be sure to specify an EFC for YOUR device CDAF (green link at top of webpage is CDAF; only $99 extra for the EFC, $49 extra to modify each device to be EFC-capable). With an EFC, you can monitor the entire effective air bandwidth for infrasonic, audio and ultrasonic sounds, as well as electromagnetic signals within this same bandwidth - including brain wave frequencies and many power, servo and control frequencies! This should greatly increase your data and documentation, and is especially useful for tracking and analyzing mind control, electronic attack, radionics, audio, power, servo, control and other signals. Since the EFC comes as a separate module which plugs into your CD devices, all you need is one EFC for all of your EFC-capable devices, PLUS you can use your EFC for other non-CD devices and uses. We can sell you the EFC by itself custom-modified with battery holder and ON/OFF switch, if you wish, and with any of these types of signal connections: RCA, phone plug, miniphone plug, BNC, USB, spade lug, flat lug, ring lug, banana, pin, barrel plug, bare wire ($249 + S/H ($6.90 USA S/H)).
The ULTIMO LINEMAN's TEST SET: The infamous Lineman's Test Set was and is still used by some phone snoops and phreakers to eavesdrop on phone conversations, make free Long Distance (LD) phone calls, avoid all risks of identification from Automatic Number Identification (ANI), Caller ID and Call Trace, diagnose phone system problems, and to run one's own ANIs on the phone lines one may encounter. The ULTS is the cordless version for much greater convenience and personal security, but of course not sold for any of the traditional Lineman's Test Set illegal uses. The ULTS comes with alligator clips and RJ-11 connectors for quick connections either to a standard RJ-11 phone connector or clipped to bare leads, screws or punch block tabs. And the ULTS's base unit is converted for battery operation for field uses. And the ULTS comes with a mike mute switch so no sounds or noises on user side is picked up. Works with cordless telephones and corded telephones. Very popular. Last made $345 [3 lb]. Popular options: 4x range extension, add $69. Black Box Interface: Much increased stealthiness (as no DC loading of the phone line results from its use), and detects when the phone line is in use without interfering with normal phone service, add $79.
The BUG & TAP DETECTOR & BLASTER: Phone conversations are not secure. Some bugs and taps (e.g. an infinity bug) can turn your phone into a room mike while it is hung up. The BTDB will detect all but the most sophisticated types of bugs and taps. Bugs and taps can then usually be blasted off the line with the push of a button (high-voltage pulse train). [2 lb], last made $229. Bug & Tap Detector function only. Works with corded and cordless phones. Last made $59 [1 lb].
The CALL LENGTH LIMITER: If you've ever opened up a phone bill and was shocked to find that the charges were far beyond your wildest fears, then you know how important it is to limit the length of phone calls - one way or the other! The CLL will not permit a phone call to exceed the length you select for it. Comes with a simple rotary switch for selecting times, and it gives off a beep and light flash 10 seconds before automatic call termination. Works with cordless phones and corded hones. Last made $95 [1 lb].
The CALL WAITING SIMULATOR: With the CWS, you simply push Button #1 and it produces the telltale sounds of Call Waiting. Push Button #2 and the CWS suspends the current call as if you really did have Call Waiting. Works with corded and cordless telephones. Last made $59 [1 lb].
The DTMF DECODER: Ever recorded the dialing of a phone number on a touch-tone phone and tore your hair out trying to guess the number? Play back the recorded dial tones through the DTMFD and it scroll-displays the dialed number. Or view the number displayed real time when the phone or any extension is being dialed, or after you Redial. Great for use with authorized surveillance operations (not a Caller ID). Works with cordless and corded telephones. Last made $199 [2 lb].
The INCOMING CALL SIMULATOR: Functionally same as the CWS above, except that it simulates the ringing of another phone in the office. Works with corded phones and cordless phones. Last made $59 [1 lb].
The MISSING CALL + OFF-HOOK INDICATOR: The MCI lights an LED when it receives a ring signal, and another LED if the handset was lifted Off-Hook (i.e. the call was answered). Plugs into any phone outlet. Ideal for those times when you must step out while expecting a call, when you need to observe for unauthorized and/or unreported phone uses, and when you need to ferret out some types of bugs and taps, and as a ringer substitute. Works with cordless telephones and corded telephones. Last made $95 [1 lb]. To add LED blinks to equate to the number of times the phone rang or went Off-Hook, add $35 for each required.
The OFF-HOOK ALARM: Have you ever waited for an important call only to later realize to your horror that the anxiously- awaited caller called but couldn't get through because an extension was left Off-hook, or because of a bad phone line or connection? Great if you have kids or pets who are so playful that they refuse to let you keep your phones on-hook when not used. The OHA starts to loudly beep if the phone is Off-hook for more than 2 minutes with no detected voice. Works with corded and cordless telephones. Last made $69 [1 lb].
RED BOX & BLUE BOXES: RBs were traditionally designed to make free payphone calls, while BBs make free long-distance calls. RB's still work in most places! Although of great historical and sentimental value that goes back to the hippies of the 1960's BBs do not now work on most U.S. However, they're still both a blast to experiment with and to show off. While other "hacker" boxes are primitively designed, our boxes use state-of-the art circuitry that duplicates the precise frequencies AND waveforms used by telecos. Lots of fun to experiment with (but pay for all of your calls)!Works with corded and cordless telephones. The PHO-PRO RED BOX last made $295. The PHO-PRO BLUE BOX last made $395. The COMBO RB/BB PURPLE BOX last made $595. [1 lb] each. HISTORICAL DIAGRAMs (per phone box type) only: $500.00.
The REMOTELY ACTIVATED INTERFACE: Concerned about feeding your pets, remotely activating/deactivating security equipment, turning ON the heating/cooling/coffee, etc during or just before you get home from home or business absence? With the RAI, you simply call home (using a Touch-Tone phone) anywhere in the world; when your answering machine (not supplied) responds, you enter the 2-key code, and the RAI instantly activates for 1-300 seconds. While activated, the RAI produces 12 VDC, 120 VAC, and relay closure outputs (all up to 5 amps each) to activate relays, motors, solenoids, and/or additional electronic devices. Works with cordless telephones and corded telephones. Last made $245 [3 lb].
The SHRIEK MODULE: No longer must you suffer with the fear, indignity, insult, and inconvenience of obscene and harassing phone calls! Caller ID is ineffective against many smart harassers who block their calls or call out of area. The SM produces an ear-piercing shriek simply by pushing a switch. Its shriek is so loud that it can cause excruciating pain to the caller. Because the SM is electronically connected directly to the phone line, its resulting sound is far louder than that possible with any whistle or other audio device that is attenuated by the phone circuitry. In addition to its use as a powerful weapon against harassers of all kinds. The SM:
A real lifesaver. Last made $195 [1 lb].
The 2-LINE TO 1-LINE CONVERTER: If your home or business has 2 phone lines and you have a bucket-full of 1-line equipment, this nifty device will allow you to instantly switch from one phone line to the other so your 1-line equipment can access either line. Saves you the great cost of buying a lot of 2-line equipment. Works with cordless telephones and corded telephones. Last made $39 [1 lb].
WIRING HITCHHIKING HARASSER ELIMINATORS:
Are your home/business wiring, piping, etc. or even car wiring hijacked to
electronically harass or surveil you by hitchhiking signals onto them? Because
power and telephone lines, and metal pipe (e.g. plumbing),
metal tubing (e.g. wire shielding) and metal linear
structures (e.g. rebar, girders, conduit, trim, rails, fencing)
surround you virtually everywhere you go in any building, electronic surveillance
devices, equipment control devices, mind control devices and electronic attack
devices can be connected to them in virtually every room and even outside
the building for some distances - these omnipresent conductors serve as the
optimum means to connect up, transmit and distribute these very harmful electronic
surveillance, mind control and electronic attack signals throughout the building
(sometimes called "carrier current" attacks -
carrier currents caused by carrier current transmitters) - optimum
conductors for virtually endless varieties of bugs, taps, harassment, control
and line blaster devices. Our WHHE devices both test
and filter out harmful hitchhiking signals!
Since these conductors are so prevalent in virtually every building, added with the technologies of time multiplexing signals and frequency multiplexing signals, literally dozens - even 100s - of these types of very harmful signals can be operational on any day and night against you - usually no matter what rooms you are in. Your home or business is just several huge signal distribution networks plus transmitting and receiving antenna arrays. And all such wiring, piping, etc. can usually be just as easily abused for electronic surveillance, mind control and electronic attacks even if you turn OFF or disconnect them from their normal uses (e.g. turning Off AC power, disconnecting phones). This is nothing new - both power and phone wiring have been lawfully used for decades to carry high-band voice, control signals, and data (e.g. faxes, modems, DSL, zons, intercoms, alarm systems for phone lines, and intercoms and alarm systems for power lines) - proven technologies using common household AC wiring and phone wiring. Furthermore, because generic power and phone wiring and piping in all or part of one's home and business are often unshielded, they can be both easily accessed and connected up to AND used as a huge transmitting and/or receiving radio antennas to communicate with anything from electronic implants - to guys parked in the street - to cellphone towers down the road - to control centers 100s miles away - to ships at sea - to satellites - to electronically harass, control and/or interfere with your life! For examples: (1) Signals on them can be transmitted wireless for miles, and (2) Physical access to the wiring, piping, etc. is not even required; because the wiring, piping, etc. is unshielded, signals can often be inductively coupled into or out of power lines, phone lines, piping, etc. (e.g. inductively-coupled phone line taps are decades old technology). Offending microwave signals can also be reflected off of ungrounded or not fully grounded metal bodies.
Since these virtually endless varieties of bugs, taps, harassment, control and line blaster devices can take on virtually any appearance and/or be hidden in just about anything inside of or near your building, they can be very difficult to detect through physical searches (short of tearing down all of your walls and ceilings where the lines and piping run, and disassembling all of your equipment). For example, these devices can be easily concealed inside TVs, radios, computers, cellphones, landline phones, electronic handheld devices, etc. - fully operating even when the TV, radio, phone, etc. itself is not turned ON. Or hidden in an outlet, inside of your wall or in your attic - even inside your car. If you share walls, floors or ceilings with other apartments, the devices can be on their side, or even outside your building. Since not all of these harmful devices are RF devices, the non-RF ones cannot be detected using TSCM field strength testing used for wireless systems. Nor can strictly receiving devices be TSCM-detected. And usually nor can transmitting devices which transmit in bursts, randomly or pre-dawn hours, nor when the perpetrator believes the area is being electronically swept and turns Off transmitters until the TSCM crew leaves. In short, your phone and power wiring, piping, etc. can be easily and secretly tapped into using hardwired, inductive-coupling and/or reflection techniques just about any place they are routed internal or external to your home/business. To understand just how frustrating it is even for experts to really troubleshoot an area, rent the Gene Hackman movie, "The Conversation" - and that was early 1970s' relatively crude, clunky and huge electronic surveillance systems!
The high-band signal frequencies used on power and phone lines, piping, etc. (which can be time multiplexed and/or frequency multiplexed to support several such systems) are usually 5+ times higher than the standard 60 Hz / 50 Hz (power wiring) or 3200 Hz maximum (phone wiring) bandwidth normally used on them. The usable bandwidth of many power and phone lines exceed 2 MHz for loops up to about 6,000 ft (1.14 miles) and much higher over much shorter loops - very usable for electronic surveillance, mind control and electronic attack. Metal piping, tubing, fencing, rails and other structures can conduct signals far higher in frequency than even power and phone lines (because most power and phone lines, pipes, etc. are unshielded, electrically noisy and inductive and leaky to high freqs, most high-band signals are under 200 KHz). Loading these unshielded conductors with all kinds of multiplexed and high-band signals they were not designed for may cause the wiring, piping, etc. itself and their terminations to resonate with strange sounds and noises which seem to emanate from walls and ceilings often on quasi-random and directional bases (e.g. strange sounds you can hear when standing in one position but not in another nearby position, and/or at some times and not at other times, and/or during certain conditions of humidity and/or temperature but not at other conditions), often throughout most of a building, and often similar to the vibrating and humming of an old or defective power transformer. They can also vibrate and hum in the ultrasonic and infrasonic bandwidths when signals mix and produce sum and difference frequency components. The weird sounds can also sound like a distant motor running, distant voices, whispering and mumbling, spiritual and God-like voices, high-pitched voices, low-pitched voices, chattering, music, animal sounds, whistles, echoes, pulsing, pounding, popping, finger-snapping, digital data sounds, zinging sounds, whooshing sounds, theremin sounds, etc., especially when real time complex signal mixings of possibly several signals at once result in partially demodulated and/or multiply-mixed high-band signals. These weird noises can literally drive some people nuts! If you are hearing sounds, noises or even voices or digital data signals or control signals coming from your walls, ceilings or appliances or inappropriately while you are on the phone, you may not be imagining it. Also, high frequencies imposed on power wiring can adversely affect induction motors (especially compressor motors common to refrigerators, freezers and air conditioners), causing them to operate roughly, chatter noisily and possibly stall out (because induction motor speed is proportional to the frequency of its power source, multiple frequencies can harm them), and can cause lights to vary in intensity or flicker. Modulated high frequencies on phone lines can cause malfunction of phone and computer equipment (e.g. loss of broadband sync, inability or slowdown in using DSL or even dial-up, faxes, zons, etc. because of a "noisy line").
We offer 4 types of WHHE systems to test for and protect against offending EMF signals: (1) The WHHE1 is for AC power lines, (2) The WHHE2 is for phone lines, (3) The WHHE3 is for motor vehicle wiring, and (4) The WHHE4 is for non-electrical metal structures, such as pipes, tubes, appliances, fencing, rails and other metal structures, and unpowered wiring. For minimal recommended protection, you must typically have at least one of each WHHE type. For optimal and continuous protection, you must have two WHHE1 (one for each 120VAC power leg), one WHHE2 for each landline phone line, one WHHE3 for each vehicle, and one WHHE4 for each non-electrical ungrounded or improperly grounded metal structure within about 25 yards of you.
The WHHE1 is designed to plug directly into any 120 VAC wall outlet (3-wire or 2-wire, 60 Hz or 50 Hz) located virtually anywhere to both detect and eliminate these higher frequencies on your AC power wiring (and to also cause an improvement in your power factor if it is typically inductive or lagging power factor (PF)) (Note: If you have an intercom, digital or other communications system which uses home/business electric power wiring to transmit/receive signals, the WHHE1 will also filter out those signals if used at same time). For example, voice, data signals, and/or control signals at 10 KHz, 50 KHz, 90 KHz, ..., 1890 KHz, 1930 KHz and 1970 KHz could all be frequency multiplexed onto a single 60 Hz power line simultaneously. That is, as long as a WHHE1 is not connected, because the WHHE1 wipes out all frequencies much above 60 Hz - wiping out those electronic attack and electronic surveillance high-band signals in one fell swoop! You may specify the WHHE1 to be non-battery powered (used only on powered AC lines to also power it), or battery-powered (used on both powered and unpowered AC lines). Note that the WHHE1's filtering functions cannot be duplicated using commercial power strips with built-in transient suppression. Power strips with transient suppression only filter out transients which are both high-voltage AND high-frequency, and then only for those devices connected to the power strip - not the VAC power lines connected to your AC outlets and located behind your walls in your home or business. Only the WHHE1 can filter out unwanted signals at your outlets and home/business wiring (as well as devices plugged into power strips). Even for devices plugged into transient-protected power strips, the designed protection is for transients which are both high-voltage AND high-frequency - much less effective against hitchhiking voice, control and data signals (which usually result in small RMS voltage level increases way below voltage levels required to switch in transient suppression).
TEST: There is a test that will likely result in positive indication of hitchhiked signals on your AC power lines, but test requires about 2 months to complete: Obtain 3 same make and model plug-in digital clocks (not battery-powered clocks), and place them in widely-separated rooms but on the same 120VAC leg. Synchronize each clock to your cellphone or other battery-operated super accurate time source. At the end of one month, check the times on each of your 3 clocks against the device you synchronized them with. Most of these types of clocks are timed by the frequency of your AC line voltage (60 Hz in the US, 50 Hz many other places). However, with most of them, the timing is also advanced by signals and electrical noise interference on your line to various degrees based on their specific electronic designs and interference properties. If there is much communications or control signals on the line, the clocks will run faster than normal. Therefore, if at the end of the month, any of your clocks are more than a couple of minutes fast, more than likely, you have a serious problem with hitchhiked signals on your line for which we strongly recommend the WHHE1 to countermeasure. Since the electrical noise on most AC lines typically rarely reaches levels that would advance most clock timing, normally, noise by itself would contribute to about a minute or two at most in one month's time to advancing timing. If any of your clocks run too slowly, the clock is probably defective. And which clock has advanced the greatest is usually the clock closest to the hitchhiking signal input point where it gets the strongest signal. Then run this test again, with all of the clocks on the other AC leg. Note: This test is not proof of either the existence or absence of hitchhiking signals during the test month because of clock defects and nominal electronic differences; clock timing may use crystals and not line frequency; low intensity, very high frequency, and/or low duty cycle (e.g. burst signals, infrequent or occasional attacks) hitchhiking signals that don't significantly increment clock timing; very noisy line, etc., but it often is a very good indication.
The WHHE2 is designed to plug directly into any normal landline phone line (works with corded phones and cordless phones), and works whether the phone is On Hook or Off Hook to eliminate higher frequencies on your phone wiring (Note: If you use DSL, modem or other digital phone line communications system, those signals will also be filtered out if used at same time). We offer 3 versions of the WHHE2: (1) WHHE2-HB: The High-Band (HB) version (the default version if you don't specify) filters out phone line freqs starting at about 4000 Hz and above. While the HB will filter out all signals at all times when toggled ON much above the normal phone voice BW of 300-3200 Hz, it will not filter out normal speech signals in the voice BW, resulting in possible but very unlikely unauthorized voice-band transmissions when phone is on-hook. (2) WHHE2-LB: The Low-Band (LB) version filters out phone line freqs starting at about 50 Hz and above. While the LB filters out voice and data signals at all times when toggled ON, it must be turned OFF when you need to talk on the phone or use it to transmit data or it will also filter out your and the other party's voices. Note that the LB version may negatively impact ring with some phones. (3) WHEE2-CMP: The Composite (CMP) version allows you to toggle between the HB and LB versions for maximum security - when you are talking on the phone, you set it at HB, when you are sending data online, you turn OFF both HB and LB, and when phone is on-hook, you set it at LB. The WHHE2 uses the common standard RJ-11 phone connector. The WHH2 always comes battery-powered.
The WHHE3 is designed for 12VDC battery systems (e.g. vehicle battery wiring) because car battery wiring can also be - some say often - used to conduct unwanted and harmful signals which can be used for electronic surveillance, mind control and electronic attack. You can specify whether you want its cable to have cigarette lighter, battery clamp or other type of terminating connector you specify (Note: Any and all vehicle underhood connection work must be done by your automechanic at your expense and always in a legal and safe manner, and we assume no liability for the installation, removal and use of a WHHE3 device on any vehicle). You may specify the WHHE3 to be non-battery powered (used only on powered 12VDC lines to also power it), or battery-powered (used on both powered and unpowered 12VDC lines).
The WHHE4 is designed to test and protect unpowered wiring, metal piping, metal tubing, metal fencing, metal railing, metal structures, and other unpowered conductors up to about 25 feet long by testing for and filtering out signal types they carry above 60 Hz. These include offending signals hardwired or induced onto metal structures, and to some extent, reflected signals. Protecting against reflected signals is designed to protect you from perps transmitting RF signals at unprotected reflective surfaces near you for its scattering effects or angular advantages, which then reflect onto you to do their dirty work; the WHHE4 grounds out air-transmitted offending RF signals it protects in your area. The WHHE4 can test and filter out great varieties of conductors which do or do not have known or accessible signal return paths (WHHE1, WHHE2 and WHHE3 test and protect circuits which have electrical return paths paired with them, e.g. AC power line neutral, phone Ring wire, car battery ground). The WHHE4 comes with two cables, each about 12.5 feet long, and each terminated by alligator clips (or some other type of connector you specify). One cable is connected to the unpowered metal wiring, piping, tubing, fencing, structure, etc. If this metal is accompanied by an accessible metal electrical return path (e.g. wire, piping, tubing, fencing, structure, etc.), the other cable is connected to it, else it is connected to nearby grounded metal, in which case an earth ground rod may be required (earth ground rod not provided, available in hardware stores). The WHH4 always comes battery-powered. Note: Not all plumbing or tubing (or fencing or structures) is continuous metal all the way into a good earth ground. Sometimes plastic plumbing or standoffs are used, which breaks any ground connection. Even if the plumbing pipe is continuous metal all the way to where buried in earth, pipe joints can be corroded enough or use enough teflon tape to break the electrical connection, the pipe can be laid in dry ground or concrete, and/or the pipe itself can be corroded enough to break its ground connection. In fact, plumbing pipe is never a reliable earth ground. National Electrical Code: 'True earth ground physically consists of a conductive rod or pipe driven into the earth to a minimum depth of 8 feet.' Plumbing pipe is never "driven into the earth" and plumbing, tubing, fencing and structures are seldom buried at least 8 feet deep. If unpowered metal is not itself solidly grounded to earth (easily determined) - not just wet-season or intermittently grounded - it makes a great conductor for offending electronic signals.
Each WHHE device comes with a signal indicator LED and the DETECT/PROTECT toggle switch. One toggled position is the DETECT Mode in which the LED will flicker and/or brighten if there is a high-band signal on the line, piping, etc. The other toggled position is the PROTECT Mode which will filter out all types of high-band signals, transients and line noise interference hitchhiking signals to remove them from your line, piping, etc. The DETECT Mode continuously tests your conductor to determine if there is any unusual signal or other electrical activity on it. The toggle switch is especially protected with a snubber circuit designed to prevent contact arcing during switches. If the WHHE device conflicts with some other known and OK equipment or function connected to your wiring in the PROTECT Mode, then don't operate that WHHE in its PROTECT Mode when normally using such equipment or function (no known interferences in the DETECT Mode).
EXTRA PROTECTION: WHHE devices are designed to further protect your lines from possibly destructive high-voltage pulses, transients and line noise which can sometimes also occur, whether natural or manmade (e.g. helps protect you from a perpetrator trying to wreck your phone or power system - even your computer - using a phone or power line blaster to deliver high-voltage transients, pulses and electrical noise to your system and equipment; and helps protect lines and equipment against damage caused by nearby lightning strike or transients, pulses and line noise). (Note that while electronic filters may eliminate 99.9+% of a signal - so much of the signal that the tiny remaining signal is lost in the line noise - no electronic filter wipes out absolutely 100% of a signal; always experiment with WHHE device first to make sure that it does not interfere with the normal use of your lines and equipment.). This very substantial added transient protection feature includes a gas discharge lightning arrestor (surge arrestor - not normally found even in expensive transient-suppressed power strips), a MOV (varistor), and the filter capacitor itself - all of which adds substantial protection from lightning strikes, line blasters, and powerful pulsed mind control and electronic attack devices hitchhiked onto your lines, piping, etc.
Plus, if specified, WHHE devices come with an output connector which permits you to directly view hitchhiking signals on an oscilloscope or hear them on a speaker or earphones (if signal is in the audio band; oscilloscope, speaker and earphones are not included). By being able to observe and/or hear the signals which should not be on your line, piping, etc., you can often tell exactly what is being communicated or controlled, and correlate the hitchhiking signals with conversations, other activities, and unexplained manifestations.
Note that since most home and office electric power systems are 220-240 VAC and standard outlet wiring is 110-120 VAC, there are two isolated AC power "legs" that power the various 110-120 VAC outlets and functions throughout the building. Therefore, to simultaneously and continuously DETECT and PROTECT both AC power legs, you need two WHHE1 devices. Also note that if your landline phone system has more than one phone line, each phone line is isolated from each other, so therefore to simultaneously and continuously DETECT and PROTECT all phone lines, you need a WHHE2 for each and every phone line. All WHHE device-types are small, portable, easy to use, uses standard connectors, and the WHHE2 and WHHE4 are 9VDC battery-powered (WHHE1 and WHHE3 operate off of their power line voltages but we can also make them to operate off of 9VDC battery to also test unpowered 120VAC power lines (WHHE1) and car battery wiring (WHHE3)). CAUTION: Do not use any WHHE device in the PROTECT Mode to do a denial-of-service attack against anyone legitimately using a phone system or power line for some normal high-band activity, for example, by interfering with or defeating DSL, modems, faxes, zons, intercoms, alarm systems, etc.
Non battery-powered WHHE1, WHHE3. Last made $395 [1 lb] each.
Battery-powered WHHE1, WHHE2-HB, WHHE2-LB, WHHE3. Last made $445 [1 lb] each.
Battery-powered WHHE2-CMP, WHHE4. Last made $495 [2 lb].
Introduction to this Page
Customized Devices Application Form (CDAF) Webpage
Like what we offer and have a website? Then please put free hotlink to our home page => Lonestarconsultinginc.com
IMAGE SPONSORED BY: |
Lone Star Consulting, Inc.
REPRINT POW-MIA IMAGE=>
ON YOUR WEBSITE
NOTE 1: We make no medical, legal, scientific, engineering, supernatural or paranormal claims including but not limited to claims about the existence, extent, intentions, purposes and capabilities of space aliens, ghosts, spirits, psychic powers, psionics, mental telepathy, precognition, auras, clairvoyance, remote viewing and pschokinesis - all related CD projects we do are based on our proprietary theories SHOULD they actually exist AND if the customer does not clearly specify in his/her CDAF another theory he/she wants the CD device design to be based upon.
NOTE 2: By policy, we
never recommend for or against, approve or disapprove, sponsor, endorse, support,
guarantee, or take any responsibility for any of the content of any non-Lone Star Consulting, Inc. webpage, website, advertisement, publication or other
statement EVEN IF WE HAVE PROVIDED A HOTLINK TO IT. And by policy, we never
recommend for or against, approve or disapprove, sponsor, endorse, support,
guarantee, or take any responsibility for any non-Lone Star Consulting, Inc.
company, product or service EVEN IF WE HAVE PROVIDED A HOTLINK TO IT. For more
information on our policies, please refer to our policies.htm
Webmaster's Test Links only - not for visitor use: Source-A Source-D Source-E Source-F Source-G Source-H Source-I Source-J Source-K Source-L Source-M Source-N Source-P Source-Q Source-R